Callback function must be of type void()(boolean isPaired). Will be called when device is paired and when device is unpaired. Allows for user-defineable actions upon device pairing/unpairing.
Pixel() and Dot() classes are now complete. Tested DotStar RGB, NeoPixel RGB, and NeoPixel RGBW, all running at same time on a single ESP32.
Next up: Must update Pixel Example as well as Holiday Lights Project
To Do: Add documentation page for Pixel() and Dot()
Pixel.h now contains Pixel() and Dot() classes.
Dot() class uses more streamlined methods; must next update Pixel() to use similar methods, which will allow Pixel and Dot to be more "interchangeable".
This time using customized interrupts to fill RMT memory on-the-fly.
* Added getChannel() to RFControl
* Add 3rd, optional, boolean argument to RFControl(int pin, bool refTick, bool defaultDrive) to that RMT can be initialized but without the default driver (allows for use of custom interrupt code instead)
Pixels now lets you reserve memory for pixels so that the call to start the RF transmission can be done for multiple pixels at once. However, gain is not as much as expected. May need to revisit if driving a large matrix of pixels is needed.
Reflects increase in max number of LWIP sockets from 10 (Arduino-ESP32 v2.0.0) to 16 (Arduino-ESP32 v2.0.1). Since HomeSpan needs at least 2 (one for Server and 1 free for new connections), this leaves 14 connections for controllers. A big improvement over only having 8!
Constructor now allows you to specify high/low timings for 1-bit and 0-bit, as well as timing for reset delay. Default parameters are included if none are specified.
Also add getPin() to RFControl (which is used by SK68XX Class) as well as boolean operator overrides for both RFControl and PwmPin/ServoPin so that instances can be checked for validity.
Optional method to automatically turn off Status LED after a *duration* seconds. LED will resume normal operation any time it is re-triggered with a new pattern. This also resets the elapsed time used to check for autoOff.
Added true/false parsing to all integer-based Characteristics. Previously true/false was only parsed for BOOL Characteristics. For integer-based on/off Characteristics, the Home App would send a 0 for off, and a 1 for on, consistent with HAP-R2. BUT...when using Home App AUTOMATIONS, the Home App would send true/false for integer-based Characteristics, which is inconsistent with HAP-R2. This meant automations worked with lights (that use the boolean ON Characteristic) but not with fans (that use the uint8 ACTIVE Characteristic).
With this "fix", true/false will be recognized all the time (except for float- and string-based Characteristics. Confirmed that fans now work with Home App Automations.
HomeSpan