013622c263
Update .gitignore
2021-09-19 14:01:30 -05:00
4d5a7754c7
Update .DS_Store
2021-09-19 13:55:36 -05:00
09fec33f50
Update .DS_Store
2021-09-19 13:55:23 -05:00
61a87ccc63
Clean up PWM - ready for testing
...
To do: Test RGB LED Examples with ESP32 and ESP32-S2 boards.
Next: Re-work Remote Control routines to make compatible with S2 and C3
2021-09-19 13:53:20 -05:00
fdc3dfb474
Update .DS_Store
2021-09-19 13:40:50 -05:00
0ccb1d34a0
More updates to PWM to ensure S2 and C3 compatibility
...
New IDF parameter in 2.0.0 for LEDC allows PWM signal to be inverted! Need to ensure flags.output_inverted is set to 0!
Also: Deleted old PWM class, which was saved for backwards compatibility. This "breaks" HomeSpan for those using the old PWM class (instead of LedPin).
Also: Added checks to ensure that frequency is achievable (for S2 and C3, the 14-bit duty resolution is insufficient to allow frequencies slower than 5 Hz - this is not a practical limit when using LedPin to drive actual LEDs and lights).
2021-09-19 13:39:40 -05:00
7255a9530f
Updating Extras to work through S2 and C3 issues
2021-09-18 16:28:56 -05:00
8b33f61464
Update src.ino
2021-09-18 13:59:36 -05:00
c67336ab57
Updated Blinker logic to support S2 and C3
...
Needed to set clk_src to APB, else default is XTAL, which is only 40MHz clock!
2021-09-18 06:35:41 -05:00
014def4c66
Fixed compiler complaint about pow() function.
...
AND added 2.0.0 only variable - see LED_USE_APB_CLK.
2021-09-15 20:05:15 -05:00
6c9bf39f54
Added PWM diagnostic messages and chip-specific maximum duty resolution
2021-09-14 21:09:58 -05:00
7469ab8a93
Update Extras.md
2021-09-14 06:17:16 -05:00
377e1d00c0
Merge branch 'dev' of https://github.com/HomeSpan/HomeSpan into dev
2021-09-13 06:02:38 -05:00
3ea8f956a5
Converted initial level of LedPin from uint8_t to float
2021-09-13 06:02:20 -05:00
aeaca68bca
Update Extras.md
2021-09-13 06:01:31 -05:00
98a5a895cc
Update PwmPin.cpp
...
Tested new functionality on RGB LED. Works well with using floating point precision.
2021-09-12 16:19:10 -05:00
60cb20f132
Completed update to PWM code
...
Should now work with ESP32-S2 and C3. Allows for as many LEDs and Servos as there are channels and timers across low and high (esp32 only) modes. Allows LED to be set with floating point precession instead of just uint8. Allows specification of LED frequency for each LED (1-65535 Hz). Automatically provides maximum duty resolution for frequency chosen.
2021-09-12 15:17:27 -05:00
0a0c536b6d
Starting work on ServoPin update
2021-09-12 12:31:08 -05:00
a5d31b1ea5
Re-working PWM routines
2021-09-12 09:23:29 -05:00
8d45e20671
Update Utils.h
2021-09-06 21:29:13 -05:00
6088fb16fe
Added logic to Timer code to allow for compiling under S2 and C3
...
With these changes the code compiles but nothing has been tested yet to see if it actually works under S2 and C3!
2021-09-06 12:35:26 -05:00
edf5522ca0
Addresses compiler warnings in Arduino-ESP32 2.0.0
2021-09-05 20:39:37 -05:00
28356c327a
Update Reference.md
2021-09-05 09:31:19 -05:00
70ebb290da
Update Reference.md
2021-09-05 09:30:00 -05:00
3d6bc0d095
Update Reference.md
2021-09-05 09:29:08 -05:00
946819f3d4
updated setValidValues() to return pointer to self
...
Allows for chaining methods.
2021-09-05 09:14:21 -05:00
6a74ce9283
Add setValidValues(int n, ...) method to Characteristic
...
Allows user to explicitly set the valid values for a Characteristic of type UINT8. Throws an error if used with any other Characteristic type.
2021-09-05 08:54:34 -05:00
2e9539a115
Fixed "space" bug in AP code
...
Fixed bug in which Access Point was not properly translating a '+' sign to a space when processing HTML forms.
2021-08-15 07:09:30 -05:00
36499f35ab
Added ESP32 chip type, revision, memory, etc. to initial output
2021-06-26 18:35:28 -05:00
e0c47f6a19
Update README.md
2021-06-22 21:16:50 -05:00
8591b2575a
Update Categories.md
2021-06-22 21:15:38 -05:00
91b0e14a08
Update ServiceList.md
2021-06-22 21:14:51 -05:00
c3ee31c782
Update Overview.md
2021-06-22 21:12:52 -05:00
45bc72c296
Update GettingStarted.md
2021-06-22 21:11:36 -05:00
85e00d51d1
Update README.md
2021-06-22 21:10:25 -05:00
a9685f73f0
Update README.md
2021-06-20 21:03:40 -05:00
3f522a17d0
Update Reference.md
2021-06-20 20:48:53 -05:00
2c9f99cc76
Update Extras.md
2021-06-20 18:17:35 -05:00
5e8d8ed76f
Merge pull request #100 from HomeSpan/release-1.3.0
...
Release 1.3.0
2021-06-20 18:07:25 -05:00
1ed7089a02
Update CLI.md
2021-06-20 18:04:59 -05:00
910eedcecd
Update README.md
2021-06-20 16:22:07 -05:00
25fdfe82ba
Update Reference.md
2021-06-20 15:53:07 -05:00
2d36bb7a81
Update src.ino
2021-06-20 15:30:25 -05:00
3eb718212d
Merge branch 'dev' of https://github.com/HomeSpan/HomeSpan into dev
2021-06-20 15:20:59 -05:00
6d77e2559a
Added setApFunction(); simplified enableAutoStartAP()
...
Simplified enableAutoStartAP() so it no longer takes any arguments. It now simply enables the auto launch of the WiFi Access Point at start-up if WiFi Credentials are not found.
New method setApFunction() will now be used to set an alternative method for the WiFi Access Point. This will be called anytime 'A' is typed into the CLI, which also covers the auto-launch of the AP at start-up a well as starting it via the Control Button, since both of these functions call processCommand('A').
2021-06-20 15:20:56 -05:00
9273304fde
Update Reference.md
2021-06-20 10:30:44 -05:00
7b66f61fbf
Update Reference.md
2021-06-20 09:57:20 -05:00
fc01e37590
Created setWifiCredentials() method
...
To be used with user-define Access Point, but CAN be used to programmatically hardcode SSID and PASSWORD (not a good idea to do this!)
2021-06-20 06:37:09 -05:00
e3d081bb35
updated enableAutoStartAP to accept user-define function as argument
2021-06-19 21:36:18 -05:00
b53081dfc7
Update CLI.md
2021-06-19 08:39:55 -05:00
Gregg