Seich
/
HomeSpan
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update UserGuide.md

This commit is contained in:
HomeSpan 2021-01-04 07:40:38 -06:00 committed by GitHub
parent 66cb42abe0
commit b43e670ed8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/UserGuide.md
View File

@ -31,8 +31,6 @@ If you are new to HomeSpan and are configuring a new device for the first time,
If you are setting up an existing device that has been previously configured in some unknown fashion, you may want to first perform a [Factory Reset](#factory-reset) to start with a fresh setup.
And if you run into any troubles, see [Troubleshooting](#troubleshooting) for tips and tricks.
Enjoy!
## HomeSpan Device States
@ -53,9 +51,12 @@ If the Status LED is steady ON, the device is connected to a local WiFi network
#### CONNECTING
If the Status LED is repeatedly flashing ON for 1 second and then OFF for 1 second, the device is actively seeking to connect to a WiFi network using the WiFi Credentials stored on the device. The device will remain in this state until HomeSpan either successfully connects to a WiFi network, or you cancel the connection process.
If the Status LED is repeatedly flashing ON for 1 second and then OFF for 1 second, the device is actively seeking to connect to a WiFi network using the WiFi Credentials stored on the device. The device will remain in this state until HomeSpan either
* successfully connects to a WiFi network
* you modify or erase the device's WiFi Credentials and restart HomeSpan via the Device Configuration Mode below
* you perform a [Factory Reset](#factory-reset)
To cancel the connection process, press and hold the HomeSpan Control Button for 3 seconds, at which point the Status LED should begin to flash rapidly (10 times per second). Upon releasing the Control Button, HomeSpan will erase the WiFi Credentials stored and reboot the device in the **NO‑WIFI** state.
Note that the Status LED is always active, so if the LED is completely off (not even blinking), the device is not powered!
## Device Configuration Mode
@ -156,11 +157,6 @@ The box can be bigger or smaller as long as you keep the same proportions. For
Note that if you can’t find *Scancardium* listed as a font choice in either the *Pages* or *Keynote* font dropdown boxes, select Format → Font → Show Fonts from the menu bar of the *Pages* or *Keynote* application to bring up a list of all installed fonts where you can search for, and select, *Scancardium*.
## Troubleshooting
This section contains potential solutions to common problems.
(coming soon)
---
[↩️](README.md) Back to the Welcome page