/*! * @file midi_Defs.h * Project Arduino MIDI Library * @brief MIDI Library for the Arduino - Definitions * @version 4.0 * @author Francois Best * @date 24/02/11 * license GPL Forty Seven Effects - 2011 */ #pragma once #include "midi_Namespace.h" // ----------------------------------------------------------------------------- #if defined(ARDUINO) # include #elif defined(FSE_AVR) # include #else # include #endif // ----------------------------------------------------------------------------- BEGIN_MIDI_NAMESPACE // ----------------------------------------------------------------------------- #define MIDI_CHANNEL_OMNI 0 #define MIDI_CHANNEL_OFF 17 // and over #define MIDI_PITCHBEND_MIN -8192 #define MIDI_PITCHBEND_MAX 8191 // ----------------------------------------------------------------------------- // Type definitions #ifndef FSE_AVR typedef uint8_t byte; #endif typedef byte StatusByte; typedef byte DataByte; typedef byte Channel; typedef byte FilterMode; // ----------------------------------------------------------------------------- /*! Enumeration of MIDI types */ enum MidiType { InvalidType = 0x00, ///< For notifying errors NoteOff = 0x80, ///< Note Off NoteOn = 0x90, ///< Note On AfterTouchPoly = 0xA0, ///< Polyphonic AfterTouch ControlChange = 0xB0, ///< Control Change / Channel Mode ProgramChange = 0xC0, ///< Program Change AfterTouchChannel = 0xD0, ///< Channel (monophonic) AfterTouch PitchBend = 0xE0, ///< Pitch Bend SystemExclusive = 0xF0, ///< System Exclusive TimeCodeQuarterFrame = 0xF1, ///< System Common - MIDI Time Code Quarter Frame SongPosition = 0xF2, ///< System Common - Song Position Pointer SongSelect = 0xF3, ///< System Common - Song Select TuneRequest = 0xF6, ///< System Common - Tune Request Clock = 0xF8, ///< System Real Time - Timing Clock Start = 0xFA, ///< System Real Time - Start Continue = 0xFB, ///< System Real Time - Continue Stop = 0xFC, ///< System Real Time - Stop ActiveSensing = 0xFE, ///< System Real Time - Active Sensing SystemReset = 0xFF, ///< System Real Time - System Reset }; // ----------------------------------------------------------------------------- /*! Enumeration of Thru filter modes */ enum MidiFilterMode { Off = 0, ///< Thru disabled (nothing passes through). Full = 1, ///< Fully enabled Thru (every incoming message is sent back). SameChannel = 2, ///< Only the messages on the Input Channel will be sent back. DifferentChannel = 3, ///< All the messages but the ones on the Input Channel will be sent back. }; // ----------------------------------------------------------------------------- /*! \brief Enumeration of Control Change command numbers. See the detailed controllers numbers & description here: http://www.somascape.org/midi/tech/spec.html#ctrlnums */ enum MidiControlChangeNumber { // High resolution Continuous Controllers MSB (+32 for LSB) ---------------- BankSelect = 0, ModulationWheel = 1, BreathController = 2, // CC3 undefined FootController = 4, PortamentoTime = 5, DataEntry = 6, ChannelVolume = 7, Balance = 8, // CC9 undefined Pan = 10, ExpressionController = 11, EffectControl1 = 12, EffectControl2 = 13, // CC14 undefined // CC15 undefined GeneralPurposeController1 = 16, GeneralPurposeController2 = 17, GeneralPurposeController3 = 18, GeneralPurposeController4 = 19, // Switches ---------------------------------------------------------------- Sustain = 64, Portamento = 65, Sostenuto = 66, SoftPedal = 67, Legato = 68, Hold = 69, // Low resolution continuous controllers ----------------------------------- SoundController1 = 70, ///< Synth: Sound Variation FX: Exciter On/Off SoundController2 = 71, ///< Synth: Harmonic Content FX: Compressor On/Off SoundController3 = 72, ///< Synth: Release Time FX: Distortion On/Off SoundController4 = 73, ///< Synth: Attack Time FX: EQ On/Off SoundController5 = 74, ///< Synth: Brightness FX: Expander On/Off SoundController6 = 75, ///< Synth: Decay Time FX: Reverb On/Off SoundController7 = 76, ///< Synth: Vibrato Rate FX: Delay On/Off SoundController8 = 77, ///< Synth: Vibrato Depth FX: Pitch Transpose On/Off SoundController9 = 78, ///< Synth: Vibrato Delay FX: Flange/Chorus On/Off SoundController10 = 79, ///< Synth: Undefined FX: Special Effects On/Off GeneralPurposeController5 = 80, GeneralPurposeController6 = 81, GeneralPurposeController7 = 82, GeneralPurposeController8 = 83, PortamentoControl = 84, // CC85 to CC90 undefined Effects1 = 91, ///< Reverb send level Effects2 = 92, ///< Tremolo depth Effects3 = 93, ///< Chorus send level Effects4 = 94, ///< Celeste depth Effects5 = 95, ///< Phaser depth // Channel Mode messages --------------------------------------------------- AllSoundOff = 120, ResetAllControllers = 121, LocalControl = 122, AllNotesOff = 123, OmniModeOff = 124, OmniModeOn = 125, MonoModeOn = 126, PolyModeOn = 127 }; // ----------------------------------------------------------------------------- /*! The midimsg structure contains decoded data of a MIDI message read from the serial port with read() */ struct Message { /*! The MIDI channel on which the message was recieved. \n Value goes from 1 to 16. */ Channel channel; /*! The type of the message (see the MidiType enum for types reference) */ MidiType type; /*! The first data byte. \n Value goes from 0 to 127. */ DataByte data1; /*! The second data byte. If the message is only 2 bytes long, this one is null. \n Value goes from 0 to 127. */ DataByte data2; /*! System Exclusive dedicated byte array. \n Array length is stocked on 16 bits, in data1 (LSB) and data2 (MSB) */ DataByte sysexArray[MIDI_SYSEX_ARRAY_SIZE]; /*! This boolean indicates if the message is valid or not. There is no channel consideration here, validity means the message respects the MIDI norm. */ bool valid; }; // ----------------------------------------------------------------------------- /*! \brief Create an instance of the library attached to a serial port. You can use HardwareSerial or SoftwareSerial for the serial port. */ #define MIDI_CREATE_INSTANCE(Type, SerialPort, Name) \ midi::MidiInterface Name((Type&)SerialPort); /*! \brief Shortcut for MIDI Interface class with template argument. The class name for a MIDI object using the hardware UART would be midi::MidiInterface, when the macro is MIDI_CLASS(HardwareSerial). */ #define MIDI_CLASS(Type) \ midi::MidiInterface END_MIDI_NAMESPACE