32 lines
1.4 KiB
C
32 lines
1.4 KiB
C
#define TFT_WIDTH 320
|
|
#define TFT_HEIGHT 240
|
|
|
|
#define ILI9341_DRIVER
|
|
#define USE_HSPI_PORT
|
|
|
|
#define TFT_MOSI 7
|
|
#define TFT_MISO 2
|
|
#define TFT_SCLK 6
|
|
#define TFT_CS 10 // Chip select control pin
|
|
#define TFT_DC 9 // Data Command control pin
|
|
#define TFT_RST 4 // Reset pin (could connect to RST pin)
|
|
|
|
// Optional - define for XPT2046 touch controller
|
|
#define TOUCH_CS 8 // Chip select pin (T_CS) of touch screen
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
|
|
// this will save ~20kbytes of FLASH
|
|
#define SMOOTH_FONT
|
|
|
|
#define SPI_FREQUENCY 27000000
|
|
|
|
#define SPI_READ_FREQUENCY 6000000 // 6 MHz is the maximum SPI read speed for the ST7789V
|