448 lines
13 KiB
C
448 lines
13 KiB
C
|
|
//////////////////////////////////////////////////////
|
|
// TFT_eSPI driver functions for ESP8266 processors //
|
|
//////////////////////////////////////////////////////
|
|
|
|
// Select the SPI port to use
|
|
// ESP8266 default (FLASH port also available via overlap mode)
|
|
SPIClass& spi = SPI;
|
|
|
|
// Buffer for SPI transmit byte padding and byte order manipulation
|
|
uint8_t spiBuffer[8] = {0,0,0,0,0,0,0,0};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
#if defined (TFT_SDA_READ) && !defined (TFT_PARALLEL_8_BIT)
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
/***************************************************************************************
|
|
** Function name: tft_Read_8
|
|
** Description: ESP8266 software SPI to read bidirectional SDA line
|
|
***************************************************************************************/
|
|
uint8_t TFT_eSPI::tft_Read_8(void)
|
|
{
|
|
uint8_t ret = 0;
|
|
uint32_t reg = 0;
|
|
|
|
for (uint8_t i = 0; i < 8; i++) { // read results
|
|
ret <<= 1;
|
|
SCLK_L;
|
|
if (digitalRead(TFT_MOSI)) ret |= 1;
|
|
SCLK_H;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: beginSDA
|
|
** Description: Detach SPI from pin to permit software SPI
|
|
***************************************************************************************/
|
|
void TFT_eSPI::begin_SDA_Read(void)
|
|
{
|
|
#ifdef TFT_SPI_OVERLAP
|
|
// Reads in overlap mode not supported
|
|
#else
|
|
spi.end();
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: endSDA
|
|
** Description: Attach SPI pins after software SPI
|
|
***************************************************************************************/
|
|
void TFT_eSPI::end_SDA_Read(void)
|
|
{
|
|
#ifdef TFT_SPI_OVERLAP
|
|
spi.pins(6, 7, 8, 0);
|
|
#else
|
|
spi.begin();
|
|
#endif
|
|
}
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
#endif // #if defined (TFT_SDA_READ)
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
/***************************************************************************************
|
|
** Function name: read byte - supports class functions
|
|
** Description: Parallel bus only - dummy function - not used
|
|
***************************************************************************************/
|
|
uint8_t TFT_eSPI::readByte(void)
|
|
{
|
|
uint8_t b = 0xAA;
|
|
return b;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
#if defined (RPI_WRITE_STROBE)
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushBlock - for ESP32 or ESP8266 RPi TFT
|
|
** Description: Write a block of pixels of the same colour
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushBlock(uint16_t color, uint32_t len)
|
|
{
|
|
uint8_t colorBin[] = { (uint8_t) (color >> 8), (uint8_t) color };
|
|
if(len) spi.writePattern(&colorBin[0], 2, 1); len--;
|
|
while(len--) {WR_L; WR_H;}
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushPixels - for ESP32 or ESP8266 RPi TFT
|
|
** Description: Write a sequence of pixels
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushPixels(const void* data_in, uint32_t len){
|
|
|
|
uint8_t *data = (uint8_t*)data_in;
|
|
while ( len >=64 ) {spi.writePattern(data, 64, 1); data += 64; len -= 64; }
|
|
if (len) spi.writePattern(data, len, 1);
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushSwapBytePixels - for ESP32 or ESP8266 RPi TFT
|
|
** Description: Write a sequence of pixels with swapped bytes
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushSwapBytePixels(const void* data_in, uint32_t len){
|
|
uint16_t *data = (uint16_t*)data_in;
|
|
while ( len-- ) {tft_Write_16(*data); data++;}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
#elif defined (ILI9488_DRIVER)
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushBlock - for ESP8266 and 3 byte RGB display
|
|
** Description: Write a block of pixels of the same colour
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushBlock(uint16_t color, uint32_t len)
|
|
{
|
|
// Split out the colours
|
|
uint8_t r = (color & 0xF800)>>8;
|
|
uint8_t g = (color & 0x07E0)>>3;
|
|
uint8_t b = (color & 0x001F)<<3;
|
|
// Concatenate 4 pixels into three 32 bit blocks
|
|
uint32_t r0 = r<<24 | b<<16 | g<<8 | r;
|
|
uint32_t r1 = g<<24 | r<<16 | b<<8 | g;
|
|
uint32_t r2 = b<<24 | g<<16 | r<<8 | b;
|
|
|
|
SPI1W0 = r0;
|
|
SPI1W1 = r1;
|
|
SPI1W2 = r2;
|
|
|
|
if (len > 4)
|
|
{
|
|
SPI1W3 = r0;
|
|
SPI1W4 = r1;
|
|
SPI1W5 = r2;
|
|
}
|
|
if (len > 8)
|
|
{
|
|
SPI1W6 = r0;
|
|
SPI1W7 = r1;
|
|
SPI1W8 = r2;
|
|
}
|
|
if (len > 12)
|
|
{
|
|
SPI1W9 = r0;
|
|
SPI1W10 = r1;
|
|
SPI1W11 = r2;
|
|
SPI1W12 = r0;
|
|
SPI1W13 = r1;
|
|
SPI1W14 = r2;
|
|
SPI1W15 = r0;
|
|
}
|
|
|
|
if (len > 20)
|
|
{
|
|
SPI1U1 = (503 << SPILMOSI);
|
|
while(len>20)
|
|
{
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1CMD |= SPIBUSY;
|
|
len -= 21;
|
|
}
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
}
|
|
|
|
if (len)
|
|
{
|
|
len = (len * 24) - 1;
|
|
SPI1U1 = (len << SPILMOSI);
|
|
SPI1CMD |= SPIBUSY;
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
}
|
|
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushPixels - for ESP8266 and 3 byte RGB display
|
|
** Description: Write a sequence of pixels
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushPixels(const void* data_in, uint32_t len){
|
|
|
|
uint16_t *data = (uint16_t*)data_in;
|
|
|
|
// Send groups of 4 concatenated pixels
|
|
if (len > 3) {
|
|
SPI1U1 = ((4 * 24 - 1) << SPILMOSI);
|
|
while (len > 3) {
|
|
|
|
uint8_t r[4];
|
|
uint8_t g[4];
|
|
uint8_t b[4];
|
|
|
|
if (!_swapBytes) {
|
|
// Split out the colours
|
|
for (uint16_t i = 0; i < 4; i++) {
|
|
uint16_t col = *data++;
|
|
r[i] = (col & 0xF8);
|
|
g[i] = (col & 0xE000)>>11 | (col & 0x07)<<5;
|
|
b[i] = (col & 0x1F00)>>5;
|
|
}
|
|
}
|
|
else {
|
|
for (uint16_t i = 0; i < 4; i++) {
|
|
uint16_t col = *data++;
|
|
r[i] = (col & 0xF800)>>8;
|
|
g[i] = (col & 0x07E0)>>3;
|
|
b[i] = (col & 0x001F)<<3;
|
|
}
|
|
}
|
|
uint32_t r0 = r[1]<<24 | b[0]<<16 | g[0]<<8 | r[0];
|
|
uint32_t r1 = g[2]<<24 | r[2]<<16 | b[1]<<8 | g[1];
|
|
uint32_t r2 = b[3]<<24 | g[3]<<16 | r[3]<<8 | b[2];
|
|
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1W0 = r0;
|
|
SPI1W1 = r1;
|
|
SPI1W2 = r2;
|
|
|
|
SPI1CMD |= SPIBUSY;
|
|
len -= 4;
|
|
}
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
}
|
|
|
|
// ILI9488 write macro is not endianess dependant, hence !_swapBytes
|
|
if (!_swapBytes) while ( len-- ) { tft_Write_16S(*data); data++;}
|
|
else while ( len-- ) {tft_Write_16(*data); data++;}
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushSwapBytePixels - for ESP8266 and 3 byte RGB display
|
|
** Description: Write a sequence of pixels with swapped bytes
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushSwapBytePixels(const void* data_in, uint32_t len){
|
|
|
|
uint16_t *data = (uint16_t*)data_in;
|
|
// ILI9488 write macro is not endianess dependant, so swap byte macro not used here
|
|
while ( len-- ) {tft_Write_16(*data); data++;}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
#else
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushBlock - for ESP8266
|
|
** Description: Write a block of pixels of the same colour
|
|
***************************************************************************************/
|
|
//Clear screen test 76.8ms theoretical. 81.5ms TFT_eSPI, 967ms Adafruit_ILI9341
|
|
//Performance 26.15Mbps@26.66MHz, 39.04Mbps@40MHz, 75.4Mbps@80MHz SPI clock
|
|
//Efficiency:
|
|
// TFT_eSPI 98.06% 97.59% 94.24%
|
|
// Adafruit_GFX 19.62% 14.31% 7.94%
|
|
//
|
|
void TFT_eSPI::pushBlock(uint16_t color, uint32_t len)
|
|
{
|
|
/*
|
|
while (len>1) { tft_Write_32(color<<16 | color); len-=2;}
|
|
if (len) tft_Write_16(color);
|
|
return;
|
|
//*/
|
|
uint16_t color16 = (color >> 8) | (color << 8);
|
|
uint32_t color32 = color16 | color16 << 16;
|
|
/*
|
|
while(len--) {
|
|
SPI1U1 = ((16-1) << SPILMOSI) | ((16-1) << SPILMISO);
|
|
SPI1W0 = color16;
|
|
SPI1CMD |= SPIBUSY;
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
}
|
|
return;
|
|
//*/
|
|
|
|
SPI1W0 = color32;
|
|
SPI1W1 = color32;
|
|
SPI1W2 = color32;
|
|
SPI1W3 = color32;
|
|
if (len > 8)
|
|
{
|
|
SPI1W4 = color32;
|
|
SPI1W5 = color32;
|
|
SPI1W6 = color32;
|
|
SPI1W7 = color32;
|
|
}
|
|
if (len > 16)
|
|
{
|
|
SPI1W8 = color32;
|
|
SPI1W9 = color32;
|
|
SPI1W10 = color32;
|
|
SPI1W11 = color32;
|
|
}
|
|
if (len > 24)
|
|
{
|
|
SPI1W12 = color32;
|
|
SPI1W13 = color32;
|
|
SPI1W14 = color32;
|
|
SPI1W15 = color32;
|
|
}
|
|
if (len > 31)
|
|
{
|
|
SPI1U1 = (511 << SPILMOSI);
|
|
while(len>31)
|
|
{
|
|
#if (defined (SPI_FREQUENCY) && (SPI_FREQUENCY == 80000000))
|
|
if(SPI1CMD & SPIBUSY) // added to sync with flag change
|
|
#endif
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1CMD |= SPIBUSY;
|
|
len -= 32;
|
|
}
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
}
|
|
|
|
if (len)
|
|
{
|
|
len = (len << 4) - 1;
|
|
SPI1U1 = (len << SPILMOSI);
|
|
SPI1CMD |= SPIBUSY;
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
}
|
|
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushPixels - for ESP8266
|
|
** Description: Write a sequence of pixels
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushPixels(const void* data_in, uint32_t len){
|
|
|
|
if(_swapBytes) {
|
|
pushSwapBytePixels(data_in, len);
|
|
return;
|
|
}
|
|
|
|
uint16_t *data = (uint16_t*) data_in;
|
|
|
|
uint32_t color[8];
|
|
|
|
SPI1U1 = (255 << SPILMOSI) | (255 << SPILMISO);
|
|
|
|
|
|
while(len>15)
|
|
{
|
|
memcpy(color,data,32);
|
|
data+=16;
|
|
|
|
len -= 16;
|
|
|
|
// ESP8266 wait time here at 40MHz SPI is ~5.45us
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1W0 = color[0];
|
|
SPI1W1 = color[1];
|
|
SPI1W2 = color[2];
|
|
SPI1W3 = color[3];
|
|
SPI1W4 = color[4];
|
|
SPI1W5 = color[5];
|
|
SPI1W6 = color[6];
|
|
SPI1W7 = color[7];
|
|
SPI1CMD |= SPIBUSY;
|
|
}
|
|
|
|
if(len)
|
|
{
|
|
uint32_t bits = (len*16-1); // bits left to shift - 1
|
|
|
|
memcpy(color,data,len<<1);
|
|
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1U1 = (bits << SPILMOSI) | (bits << SPILMISO);
|
|
SPI1W0 = color[0];
|
|
SPI1W1 = color[1];
|
|
SPI1W2 = color[2];
|
|
SPI1W3 = color[3];
|
|
SPI1W4 = color[4];
|
|
SPI1W5 = color[5];
|
|
SPI1W6 = color[6];
|
|
SPI1W7 = color[7];
|
|
SPI1CMD |= SPIBUSY;
|
|
}
|
|
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
|
|
}
|
|
|
|
/***************************************************************************************
|
|
** Function name: pushSwapBytePixels - for ESP8266
|
|
** Description: Write a sequence of pixels with swapped bytes
|
|
***************************************************************************************/
|
|
void TFT_eSPI::pushSwapBytePixels(const void* data_in, uint32_t len){
|
|
|
|
uint8_t* data = (uint8_t*)data_in;
|
|
//uint16_t* data = (uint16_t*)data_in;
|
|
|
|
uint32_t color[8];
|
|
|
|
SPI1U1 = (255 << SPILMOSI) | (255 << SPILMISO);
|
|
|
|
while(len>15)
|
|
{
|
|
uint32_t i = 0;
|
|
while(i<8) { color[i++] = DAT8TO32(data); data+=4; }
|
|
|
|
len -= 16;
|
|
|
|
// ESP8266 wait time here at 40MHz SPI is ~5.45us
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1W0 = color[0];
|
|
SPI1W1 = color[1];
|
|
SPI1W2 = color[2];
|
|
SPI1W3 = color[3];
|
|
SPI1W4 = color[4];
|
|
SPI1W5 = color[5];
|
|
SPI1W6 = color[6];
|
|
SPI1W7 = color[7];
|
|
SPI1CMD |= SPIBUSY;
|
|
}
|
|
|
|
if(len)
|
|
{
|
|
uint32_t i = 0;
|
|
uint32_t bits = (len*16-1); // bits left to shift - 1
|
|
len = (len+1)>>1;
|
|
while(len--) { color[i++] = DAT8TO32(data); data+=4; }
|
|
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
SPI1U1 = (bits << SPILMOSI) | (bits << SPILMISO);
|
|
SPI1W0 = color[0];
|
|
SPI1W1 = color[1];
|
|
SPI1W2 = color[2];
|
|
SPI1W3 = color[3];
|
|
SPI1W4 = color[4];
|
|
SPI1W5 = color[5];
|
|
SPI1W6 = color[6];
|
|
SPI1W7 = color[7];
|
|
SPI1CMD |= SPIBUSY;
|
|
}
|
|
|
|
while(SPI1CMD & SPIBUSY) {}
|
|
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////
|
|
#endif
|
|
////////////////////////////////////////////////////////////////////////////////////////
|