95 lines
4.4 KiB
C
95 lines
4.4 KiB
C
// USER DEFINED SETTINGS
|
|
// Set driver type, fonts to be loaded etc
|
|
//
|
|
// See the User_Setup_Select.h file if you wish to be able to define multiple
|
|
// setups and then easily select which setup file is used by the compiler.
|
|
//
|
|
// If this file is edited correctly then all the library example sketches should
|
|
// run without the need to make any more changes for a particular hardware setup!
|
|
|
|
// ##################################################################################
|
|
//
|
|
// Section 0. Call up the right driver file and any options for it
|
|
//
|
|
// ##################################################################################
|
|
|
|
#define EPD_DRIVER // ePaper driver
|
|
|
|
// ##################################################################################
|
|
//
|
|
// Section 1. Define the pins that are used to interface with the display here
|
|
//
|
|
// ##################################################################################
|
|
|
|
|
|
// READ THIS READ THIS READ THIS READ THIS READ THIS READ THIS
|
|
// Install the ePaper library for your own display size and type
|
|
// from here:
|
|
// https://github.com/Bodmer/EPD_Libraries
|
|
|
|
// Note: Pin allocations for the ePaper signals are defined in
|
|
// the ePaper library's epdif.h file. There follows the default
|
|
// pins already included in epdif.h file for the ESP8266:
|
|
|
|
///////////////////////////////////////////////////////////////////
|
|
// For ESP8266 connect as follows: //
|
|
// Display 3.3V to NodeMCU 3V3 //
|
|
// Display GND to NodeMCU GND //
|
|
// //
|
|
// Display GPIO NodeMCU pin //
|
|
// BUSY 5 D1 //
|
|
// RESET 4 D2 //
|
|
// DC 0 D3 //
|
|
// CS 2 D4 //
|
|
// CLK 14 D5 //
|
|
// D6 (MISO not connected to display) //
|
|
// DIN 13 D7 //
|
|
// //
|
|
///////////////////////////////////////////////////////////////////
|
|
|
|
|
|
// ##################################################################################
|
|
//
|
|
// Section 2. Not used
|
|
//
|
|
// ##################################################################################
|
|
|
|
|
|
// ##################################################################################
|
|
//
|
|
// Section 3. Define the fonts that are to be used here
|
|
//
|
|
// ##################################################################################
|
|
|
|
// Comment out the #defines below with // to stop that font being loaded
|
|
// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
|
|
// normally necessary. If all fonts are loaded the extra FLASH space required is
|
|
// about 17Kbytes. To save FLASH space only enable the fonts you need!
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 below, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
|
|
// this will save ~20kbytes of FLASH
|
|
#define SMOOTH_FONT
|
|
|
|
// ##################################################################################
|
|
//
|
|
// Section 4. Not used
|
|
//
|
|
// ##################################################################################
|
|
|
|
|
|
// ##################################################################################
|
|
//
|
|
// Section 5. Not used
|
|
//
|
|
// ##################################################################################
|
|
|