45 lines
		
	
	
		
			2.0 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			45 lines
		
	
	
		
			2.0 KiB
		
	
	
	
		
			C
		
	
	
	
| // Setup file for RP2040 and SPI ILI9341 display using PIO for the display interface
 | |
| #define USER_SETUP_ID 61
 | |
| // The PIO can only be user with Earle Philhower's RP2040 board package:
 | |
| // https://github.com/earlephilhower/arduino-pico
 | |
| 
 | |
| // PIO SPI allows high SPI clock rates to be used when the processor is over-clocked.
 | |
| // PIO SPI is "write only" and the TFT_eSPI touch functions are not supported.
 | |
| // A touch screen could be used with a third party library on different SPI pins.
 | |
| 
 | |
| // This invokes the PIO based SPI interface for the RP2040 processor.
 | |
| #define RP2040_PIO_SPI
 | |
| 
 | |
| // TFT driver
 | |
| #define ILI9341_DRIVER
 | |
| 
 | |
| // Pins - the PIO will control MOSI, SCLK and DC pins
 | |
| // Any digital GPIO pins may be used
 | |
| //#define TFT_MISO  -1 // MISO is not used or supported
 | |
| #define TFT_MOSI  11
 | |
| #define TFT_SCLK  10
 | |
| #define TFT_CS     9  // Chip select control pin
 | |
| #define TFT_DC     8  // Data Command control pin
 | |
| #define TFT_RST   15  // Reset pin (could connect to Arduino RESET pin)
 | |
| 
 | |
| //#define TFT_BL   13           // Optional LED back-light control pin
 | |
| //#define TFT_BACKLIGHT_ON LOW  // Level to turn ON back-light (HIGH or LOW)
 | |
| 
 | |
| 
 | |
| #define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
 | |
| #define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
 | |
| #define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
 | |
| #define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
 | |
| #define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
 | |
| #define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
 | |
| #define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
 | |
| 
 | |
| #define SMOOTH_FONT
 | |
| 
 | |
| // #define SPI_FREQUENCY   1000000
 | |
| // #define SPI_FREQUENCY   5000000
 | |
| // #define SPI_FREQUENCY  10000000
 | |
| // #define SPI_FREQUENCY  20000000
 | |
| // #define SPI_FREQUENCY  32000000
 | |
| #define SPI_FREQUENCY  62500000
 |