TFT_eSPI/User_Setups/Setup210_Maixduino.h

166 lines
5.1 KiB
C

//Use Maixduino Core and https://github.com/sipeed/Maixduino/pull/99
// or https://github.com/UT2UH/Maixduino with missing boards added
#if defined (MAIX_AMIGO)
// ILI9486 320 x 480 display in 8-bit parallel mode
#define ILI9486_DRIVER // Configure all registers
#define TFT_WIDTH 320
#define TFT_HEIGHT 480
#define TFT_CS 36 // Chip select control pin
#define TFT_RST 37 // Reset pin
#define TFT_DC 38 // Data Command control pin
#define TFT_WR 39 // Write strobe control pin
#define TFT_LED -1 // Define as not used
#define TOUCH_W 320
#define TOUCH_H 280
#define CST_DEVICE_ADDR 0x38
#define CST_INT 33
#define SPI_FREQUENCY 20000000
#elif defined (MAIX_CUBE)
// ST7789 240 x 240 1.3" IPS display in 8-bit parallel mode
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 240
#define TFT_MISO 26
#define TFT_MOSI 28
#define TFT_SCLK 27
#define TFT_CS 36
#define TFT_RST 37
#define TFT_DC 38
#define TFT_WR 39
#define TFT_LED 17
#define HAS_BACKLIGHT
#define TOUCH_INT -1
#define SPI_FREQUENCY 20000000
#elif defined (MAIX_GO)
// ST7789 240 x 320 display in 8-bit parallel mode
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
// If colours are inverted (white shows as black) then uncomment one of the next
// 2 lines try both options, one of the options should correct the inversion.
// #define TFT_INVERSION_ON
#define TFT_INVERSION_OFF
#define TFT_CS 36
#define TFT_RST 37
#define TFT_DC 38
#define TFT_WR 39
#define TFT_LED -1
#define TOUCH_INT -1
#define SPI_FREQUENCY 20000000
#elif defined(MAIX_DUINO)
// ST7789 240 x 320 display in 8-bit parallel mode
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
#define TFT_INVERSION_OFF
#define TFT_CS 36
#define TFT_RST 37
#define TFT_DC 38
#define TFT_WR 39
#define TFT_LED 17
#define HAS_BACKLIGHT
#define TOUCH_INT -1
#define SPI_FREQUENCY 20000000
#elif defined (MAIX_DOCK_M1) || defined (MAIX_DOCK_M1W)
// ST7789 240 x 320 display in 8-bit parallel mode
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
#define TFT_INVERSION_OFF
#define TFT_CS 36
#define TFT_RST 37
#define TFT_DC 38
#define TFT_WR 39
#define TFT_LED -1
#define TOUCH_INT -1
#define SPI_FREQUENCY 20000000
#elif defined (MAIX_BIT) || defined (MAIX_BIT_MIC)
// ST7789 240 x 320 display in 8-bit parallel mode
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
#define TFT_INVERSION_OFF
#define TFT_CS 36
#define TFT_RST 37
#define TFT_DC 38
#define TFT_WR 39
#define TFT_LED -1
#define TOUCH_INT -1
#define SPI_FREQUENCY 20000000
#elif defined (AIOT_DAAN)
// ST7789 240 x 320 display in 8-bit parallel mode
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
#define TFT_CS 36
#define TFT_RST 37
#define TFT_DC 38
#define TFT_WR 39
#define TFT_LED -1
#define TOUCH_INT -1
#define SPI_FREQUENCY 20000000
#elif defined (M5STICK_V)
// ST7789 240 x 280 display
#define ST7789_2_DRIVER // Configure all registers
#define TFT_WIDTH 135
#define TFT_HEIGHT 240
#define CGRAM_OFFSET // Library will add offsets required
#define TFT_MISO -1
#define TFT_MOSI 18
#define TFT_SCLK 19
#define TFT_DC 20
#define TFT_RST 21
#define TFT_CS 22
#define TFT_LED -1
#define TOUCH_INT -1
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 20000000
#endif
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT