33 lines
1.3 KiB
C
33 lines
1.3 KiB
C
// This is a configuration setup file example for an RP2040 processor
|
|
// Adapt as required for your own hardware configuration
|
|
|
|
#define RP2040_PIO_SPI
|
|
|
|
#define GC9A01_DRIVER
|
|
|
|
#define TFT_WIDTH 240
|
|
#define TFT_HEIGHT 240
|
|
|
|
#define TFT_MOSI 10
|
|
#define TFT_MISO 9
|
|
#define TFT_SCLK 8
|
|
#define TFT_CS 7 // Chip select control pin
|
|
#define TFT_DC 4 // Data Command control pin
|
|
#define TFT_RST 5 // Reset pin (could connect to Arduino RESET pin)
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|
|
|
|
#define SPI_FREQUENCY 66000000
|
|
|
|
#define SPI_READ_FREQUENCY 20000000
|
|
|
|
#define SPI_TOUCH_FREQUENCY 2500000
|