* Added T-DISPLAY-S3 i8080 support for more than 33 data pins (#2296)
* Modified the ESP32-S3 I8080 interface's support for data pins above 33 pins.
* Added T-DISPLAY-S3 support
* Update Setup206_LilyGo_T_Display_S3.h
* Eliminate need for TFT_DATA_PIN_OFFSET_EN in setup file
* Update TFT_eSPI_ESP32_S3.h
* Update User_Setup_Select.h
* Add new init sequence for LilyGo T Display S3
Co-authored-by: Micky <513673326@qq.com>
// For RP2040 processor and 8 or 16 bit parallel displays:
// The parallel interface write cycle period is derived from a division of the CPU clock
// speed so scales with the processor clock. This means that the divider ratio may need
// to be increased when overclocking. I may also need to be adjusted dependant on the
// display controller type (ILI94341, HX8357C etc). If RP2040_PIO_CLK_DIV is not defined
// the library will set default values which may not suit your display.
// The display controller data sheet will specify the minimum write cycle period. The
// controllers often work reliably for shorter periods, however if the period is too short
// the display may not initialise or graphics will become corrupted.
// PIO write cycle frequency = (CPU clock/(4 * RP2040_PIO_CLK_DIV))
//#define RP2040_PIO_CLK_DIV 1 // 32ns write cycle at 125MHz CPU clock
#define RP2040_PIO_CLK_DIV 2 // 64ns write cycle at 125MHz CPU clock
//#define RP2040_PIO_CLK_DIV 3 // 96ns write cycle at 125MHz CPU clock
The library has been cleaned up as it has got a bit untidy due to the large number of small incremental changes.
4bit Sprite examples renaed to be consistent with others.
alphaBlend example moved to generic folder (alphaBlend fn was moved to TFT_eSPI class).
Added sections + explanatory comments to functions prototypes.
Temporary comments added for potential gotchas for noobs when using DMA.
spi_begin/end functions renamed to reflect functionality. Old fns retained for backwards compatibility with user setup.h files.
Added SD card storage for smooth fonts with ESP32
ESP32 will use PSRAM (if available and enabled) to hold smooth font
metrics
Improve performance of ESP32 Sprite shared functions
Add basic ST7789 driver option
Latent bug fixes for pin mask
// For ST7789 ONLY, define the colour order IF the blue and red are
swapped on your display
//#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
The library supported 240x240 ST7789 displays only which require an 80
pixel offset in rotation 2 and 3
The library now also supports the 240x320 display which has a different
RGB colour order.
Bodmer