2882f1d794
ST7735: Add support for RobotLCD Arduino shield
...
Without this change, my LCD screen only displays some bars on the screen after init.
2022-08-23 18:17:56 +02:00
0416870179
ST7735: fix RGB/BGR selection issue due to ST7735_XXX vs INITR_XXX confusion
...
Without this change, color order is always set to RGB,
no matter what ST7735_XXX value is defined in User_Setup.h
2022-08-21 19:20:23 +02:00
f96c42253c
Add support for choosing colour order on ST7735
...
See #639
2020-11-02 17:59:04 +00:00
7a3d6bcab9
Minor performance improvements for ESP32
...
Remove legacy changes for double buffered SPI
Eliminate unecessary ESP32 SPI read/modify write
Eliminate two stage control bit changes (may impact some diplays with
setup/hold timing and show ESP32 hardware register bug?)
Add single register write for CS and DC command
Make setAddrWindow smarter (as used in previous AVR library)
Improve compatibility with GFX sketches
Re-arrange comments slightly to improve positioning
2018-11-14 01:05:16 +00:00
d4ff3c8dce
Add support for red-tabbed 80x160 screen.
2018-11-07 14:56:27 +00:00
3ad0820390
adds support for 160x80 ebay module
...
unknown module 160x80 BGR inverted, offset 26
differs from adafruit of same size
2018-07-30 12:08:02 -05:00
c735d18a41
fix for ST7735_REDTAB
2017-09-11 03:32:34 -04:00
0bd3930b72
Correct missing #defines for ST7735 TFT
2017-04-26 22:16:59 +01:00
7a35c9dc4e
Tidy legacy comments
2017-04-19 00:23:48 +01:00
c2dcf25cc1
Add support for ST7735 128x128 display
...
May not cater for 128x128 ST7735 displays with different RGB and offset
configurations.
2017-04-16 16:13:12 +01:00
d31cbc3dbd
Format and code tidy - fixes for compatibility issues
2017-04-14 01:04:04 +01:00
20c9086853
Add support for ST7735 128x128 TFT
2017-03-17 00:03:35 +00:00
e1b2959577
First draft release
...
Not yet fully tested but seems to work OK!
2017-02-22 03:07:17 +00:00
Nicolas Boulicault