Simplified driver ST7789_2_DRIVER not supports 135 x 240 display.
This will not fix#763 since user specifies alternative ST7789_DRIVER which already supports 135x240 displays.
The SSD1963 support has been tested with a 480x800 pixel display from Buy Display.
Support for reading an ST7796 SPI display has been added.
pushToSprite added to keywords list.
#740: To avoid ambiguity the pushSprite for writing a sprite to another sprite has been renamed pushToSprite
#704: Change to 18 bit colurs for SSD1963 with SPI interface
Remove outdated TFT_SPIFFS_Jpeg example
TFT_eFEX also needs updating so Rotated_Sprite_3 example renders correctly.
pushImage for FLASH images updated so partly off-screen images are correctly rendered.
The library has been cleaned up as it has got a bit untidy due to the large number of small incremental changes.
4bit Sprite examples renaed to be consistent with others.
alphaBlend example moved to generic folder (alphaBlend fn was moved to TFT_eSPI class).
Added sections + explanatory comments to functions prototypes.
Temporary comments added for potential gotchas for noobs when using DMA.
spi_begin/end functions renamed to reflect functionality. Old fns retained for backwards compatibility with user setup.h files.
Images/sprites overlapping both sides of the display were not correctly
cropped.
Option added to allow RGB<>BGR colourr swap option to be used.
ESP8266 Wemos D1 R1 pin numbering difference accomodated.
TTGO T4 setup changed to use HSPI port.
Added SD card storage for smooth fonts with ESP32
ESP32 will use PSRAM (if available and enabled) to hold smooth font
metrics
Improve performance of ESP32 Sprite shared functions
Add basic ST7789 driver option
Latent bug fixes for pin mask
// For ST7789 ONLY, define the colour order IF the blue and red are
swapped on your display
//#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
Remove legacy changes for double buffered SPI
Eliminate unecessary ESP32 SPI read/modify write
Eliminate two stage control bit changes (may impact some diplays with
setup/hold timing and show ESP32 hardware register bug?)
Add single register write for CS and DC command
Make setAddrWindow smarter (as used in previous AVR library)
Improve compatibility with GFX sketches
Re-arrange comments slightly to improve positioning
The library supported 240x240 ST7789 displays only which require an 80
pixel offset in rotation 2 and 3
The library now also supports the 240x320 display which has a different
RGB colour order.
Use line is form:
tft.init(1);
or:
tft.init(INITR_REDTAB);
// Enumerated the configurations in library are:
#define INITR_GREENTAB
0x0
#define INITR_REDTAB 0x1
#define INITR_BLACKTAB 0x2
#define
INITR_GREENTAB2 0x3 // Use if you get random pixels on two edges of
green tab display
#define INITR_GREENTAB3 0x4 // Use if you get random
pixels on edge(s) of 128x128 screen
#define INITR_GREENTAB128 0x5 // Use
if you only get part of 128x128 screen in rotation 0 & 1
#define INITB
0xB
This is stage one of support for ePaper displays from Waveshare.
Examples for 1 bit per pixel Sprites and 2 or 3 colour ePaper displays
to follow soon.
Add interface driver macro
Add 8 bit parallel support
Add 8 bit parallel read support
Add ILI9481, ILI9488 and HX8357D drivers
Update version and ReadMe
Update Create_Font processing sketch
Add slightly narrower alternative font 8
This commit fixes an issue when setting screen width
and height from the constructor (e.g., user sketch),
followed by setRotation(i). Previously, setRotation
used TFT_WIDTH and TFT_HEIGHT, ignoring user overrides.
Bodmer