Fix #1547 for RP2040 processor with ST7789 TFT
Add Arduino Nano Connect setup example 62
This commit is contained in:
Bodmer
parent
420165904c
commit
e61fb8c78d
|
|
@ -65,8 +65,8 @@ void TFT_eSPI_Button::drawButton(bool inverted, String long_name) {
|
|||
_gfx->drawRoundRect(_x1, _y1, _w, _h, r, outline);
|
||||
|
||||
if (_gfx->textfont == 255) {
|
||||
_gfx->setCursor(_x1 + (_w / 2) - (strlen(_label) * 3 * _textsize),
|
||||
_y1 + (_h / 2) - (4 * _textsize));
|
||||
_gfx->setCursor(_x1 + (_w / 8),
|
||||
_y1 + (_h / 4));
|
||||
_gfx->setTextColor(text);
|
||||
_gfx->setTextSize(_textsize);
|
||||
_gfx->print(_label);
|
||||
|
|
|
|||
|
|
@ -287,7 +287,7 @@ void TFT_eSPI::pushBlock(uint16_t color, uint32_t len){
|
|||
{
|
||||
while (*_spi_cmd&SPI_USR);
|
||||
*_spi_cmd = SPI_USR;
|
||||
len -= 32;
|
||||
len -= 32;
|
||||
}
|
||||
|
||||
// Do not wait here
|
||||
|
|
|
|||
|
|
@ -420,7 +420,7 @@ void TFT_eSPI::pushBlock(uint16_t color, uint32_t len)
|
|||
uint32_t gb = g<<8 | b;
|
||||
// Must wait before changing to 16 bit
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
while ( len > 1 ) {
|
||||
while (!spi_is_writable(SPI_X)){}; spi_get_hw(SPI_X)->dr = rg;
|
||||
while (!spi_is_writable(SPI_X)){}; spi_get_hw(SPI_X)->dr = br;
|
||||
|
|
@ -429,7 +429,7 @@ void TFT_eSPI::pushBlock(uint16_t color, uint32_t len)
|
|||
}
|
||||
// Must wait before changing back to 8 bit
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (8 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
}
|
||||
|
||||
// Mop up the remaining pixels
|
||||
|
|
@ -524,7 +524,7 @@ bool TFT_eSPI::dmaBusy(void) {
|
|||
#if !defined (RP2040_PIO_INTERFACE)
|
||||
// For SPI must also wait for FIFO to flush and reset format
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#endif
|
||||
|
||||
return false;
|
||||
|
|
@ -541,7 +541,7 @@ void TFT_eSPI::dmaWait(void)
|
|||
#if !defined (RP2040_PIO_INTERFACE)
|
||||
// For SPI must also wait for FIFO to flush and reset format
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -8,6 +8,11 @@
|
|||
#ifndef _TFT_eSPI_RP2040H_
|
||||
#define _TFT_eSPI_RP2040H_
|
||||
|
||||
#ifndef ARDUINO_ARCH_MBED
|
||||
#define FONT_FS_AVAILABLE
|
||||
#define SPIFFS LittleFS
|
||||
#endif
|
||||
|
||||
// Required for both the official and community board packages
|
||||
#include "hardware/dma.h"
|
||||
#include "hardware/pio.h"
|
||||
|
|
@ -37,7 +42,7 @@
|
|||
#endif
|
||||
|
||||
// Processor specific code used by SPI bus transaction begin/end_tft_write functions
|
||||
#define SET_BUS_WRITE_MODE spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST)
|
||||
#define SET_BUS_WRITE_MODE spi_set_format(SPI_X, 8, (spi_cpol_t)(TFT_SPI_MODE >> 1), (spi_cpha_t)(TFT_SPI_MODE & 0x1), SPI_MSB_FIRST)
|
||||
#define SET_BUS_READ_MODE // spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST)
|
||||
#else
|
||||
// Processor specific code used by SPI bus transaction begin/end_tft_write functions
|
||||
|
|
@ -98,7 +103,7 @@
|
|||
#ifdef SMOOTH_FONT
|
||||
// Call up the filing system for the anti-aliased fonts
|
||||
//#define FS_NO_GLOBALS
|
||||
//#include <FS.h>
|
||||
#include <FS.h>
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////////////////////////////////////////////////
|
||||
|
|
@ -183,7 +188,7 @@
|
|||
#endif
|
||||
#else
|
||||
#ifdef TOUCH_CS
|
||||
#error Touch screen not supported in parallel mode, use a separate library.
|
||||
#error Touch screen not supported in parallel or SPI PIO mode, use a separate library.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -271,10 +276,10 @@
|
|||
|
||||
// This swaps to 8 bit mode, then back to 16 bit mode
|
||||
#define tft_Write_8(C) while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {}; \
|
||||
spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST); \
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (8 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS); \
|
||||
spi_get_hw(SPI_X)->dr = (uint32_t)(C); \
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {}; \
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST)
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS)
|
||||
|
||||
// Note: the following macros do not wait for the end of transmission
|
||||
|
||||
|
|
|
|||
|
|
@ -104,6 +104,7 @@
|
|||
#define ST7789_TEOFF 0x34 // Tearing effect line off
|
||||
#define ST7789_TEON 0x35 // Tearing effect line on
|
||||
#define ST7789_MADCTL 0x36 // Memory data access control
|
||||
#define ST7789_VSCRSADD 0x37 // Vertical screoll address
|
||||
#define ST7789_IDMOFF 0x38 // Idle mode off
|
||||
#define ST7789_IDMON 0x39 // Idle mode on
|
||||
#define ST7789_RAMWRC 0x3C // Memory write continue (ST7789V)
|
||||
|
|
|
|||
13
TFT_eSPI.cpp
13
TFT_eSPI.cpp
|
|
@ -3097,9 +3097,9 @@ void TFT_eSPI::setWindow(int32_t x0, int32_t y0, int32_t x1, int32_t y1)
|
|||
DC_C;
|
||||
#if !defined (SPI_18BIT_DRIVER)
|
||||
#if defined (RPI_DISPLAY_TYPE) // RPi TFT type always needs 16 bit transfers
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#else
|
||||
spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (8 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#endif
|
||||
#endif
|
||||
spi_get_hw(SPI_X)->dr = (uint32_t)TFT_CASET;
|
||||
|
|
@ -3128,7 +3128,7 @@ void TFT_eSPI::setWindow(int32_t x0, int32_t y0, int32_t x1, int32_t y1)
|
|||
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
#if !defined (SPI_18BIT_DRIVER)
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#endif
|
||||
DC_D;
|
||||
#else
|
||||
|
|
@ -3184,7 +3184,7 @@ void TFT_eSPI::readAddrWindow(int32_t xs, int32_t ys, int32_t w, int32_t h)
|
|||
#if (defined(ARDUINO_ARCH_RP2040) || defined (ARDUINO_ARCH_MBED)) && !defined(RP2040_PIO_INTERFACE)
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
DC_C;
|
||||
spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (8 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
spi_get_hw(SPI_X)->dr = (uint32_t)TFT_CASET;
|
||||
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
|
|
@ -3210,7 +3210,6 @@ void TFT_eSPI::readAddrWindow(int32_t xs, int32_t ys, int32_t w, int32_t h)
|
|||
spi_get_hw(SPI_X)->dr = (uint32_t)TFT_RAMRD;
|
||||
|
||||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
//spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
DC_D;
|
||||
|
||||
// Flush the rx buffer and reset overflow flag
|
||||
|
|
@ -3305,9 +3304,9 @@ void TFT_eSPI::drawPixel(int32_t x, int32_t y, uint32_t color)
|
|||
while (spi_get_hw(SPI_X)->sr & SPI_SSPSR_BSY_BITS) {};
|
||||
|
||||
#if defined (RPI_DISPLAY_TYPE) // RPi TFT type always needs 16 bit transfers
|
||||
spi_set_format(SPI_X, 16, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (16 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#else
|
||||
spi_set_format(SPI_X, 8, (spi_cpol_t)0, (spi_cpha_t)0, SPI_MSB_FIRST);
|
||||
hw_write_masked(&spi_get_hw(SPI_X)->cr0, (8 - 1) << SPI_SSPCR0_DSS_LSB, SPI_SSPCR0_DSS_BITS);
|
||||
#endif
|
||||
|
||||
if (addr_col != x) {
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
#ifndef _TFT_eSPIH_
|
||||
#define _TFT_eSPIH_
|
||||
|
||||
#define TFT_ESPI_VERSION "2.4.25"
|
||||
#define TFT_ESPI_VERSION "2.4.27"
|
||||
|
||||
// Bit level feature flags
|
||||
// Bit 0 set: viewport capability
|
||||
|
|
|
|||
|
|
@ -19,7 +19,7 @@
|
|||
|
||||
// Only ONE line below should be uncommented. Add extra lines and files as needed.
|
||||
|
||||
#include <User_Setup.h> // Default setup is root library folder
|
||||
//#include <User_Setup.h> // Default setup is root library folder
|
||||
|
||||
//#include <User_Setups/Setup1_ILI9341.h> // Setup file configured for my ILI9341
|
||||
//#include <User_Setups/Setup2_ST7735.h> // Setup file configured for my ST7735
|
||||
|
|
@ -46,7 +46,7 @@
|
|||
//#include <User_Setups/Setup20_ILI9488.h> // Setup file for ESP8266 and ILI9488 SPI bus TFT
|
||||
//#include <User_Setups/Setup21_ILI9488.h> // Setup file for ESP32 and ILI9488 SPI bus TFT
|
||||
|
||||
//#include <User_Setups/Setup22_TTGO_T4.h> // Setup file for ESP32 and TTGO T4 version 1.2
|
||||
#include <User_Setups/Setup22_TTGO_T4.h> // Setup file for ESP32 and TTGO T4 version 1.2
|
||||
//#include <User_Setups/Setup22_TTGO_T4_v1.3.h> // Setup file for ESP32 and TTGO T4 version 1.3
|
||||
//#include <User_Setups/Setup23_TTGO_TM.h> // Setup file for ESP32 and TTGO TM ST7789 SPI bus TFT
|
||||
//#include <User_Setups/Setup24_ST7789.h> // Setup file configured for ST7789 240 x 240
|
||||
|
|
@ -79,8 +79,9 @@
|
|||
//#include <User_Setups/Setup51_LilyPi_ILI9481.h> // Setup file for LilyGo LilyPi with ILI9481 display
|
||||
//#include <User_Setups/Setup52_LilyPi_ST7796.h> // Setup file for LilyGo LilyPi with ST7796 display
|
||||
|
||||
//#include <User_Setups/Setup60_RP2040_ILI9341.h> // Setup file for Raspberry Pi Pico with SPI ILI9341
|
||||
//#include <User_Setups/Setup60_RP2040_ILI9341.h> // Setup file for RP2040 with SPI ILI9341
|
||||
//#include <User_Setups/Setup61_RP2040_ILI9341_PIO_SPI.h> // Setup file for RP2040 with PIO SPI ILI9341
|
||||
//#include <User_Setups/Setup62_RP2040_Nano_Connect_ILI9341.h> // Setup file for RP2040 with SPI ILI9341
|
||||
|
||||
//#include <User_Setups/Setup70_ESP32_S2_ILI9341.h> // Setup file for ESP32 S2 with SPI ILI9341
|
||||
|
||||
|
|
@ -106,6 +107,11 @@
|
|||
//#include <User_Setups/SetupX_Template.h>
|
||||
|
||||
|
||||
//#include <User_Setups/Dustin_ILI9488.h> // Setup file for Dustin Watts PCB with ILI9488
|
||||
//#include <User_Setups/Dustin_ST7796.h> // Setup file for Dustin Watts PCB with ST7796
|
||||
|
||||
|
||||
|
||||
#endif // USER_SETUP_LOADED
|
||||
|
||||
|
||||
|
|
@ -218,7 +224,6 @@
|
|||
#define TFT_DRIVER 0x0000
|
||||
#else
|
||||
#define TFT_DRIVER 0x0000
|
||||
# error "####### NO TFT DRIVER DEFINED #######"
|
||||
#endif
|
||||
|
||||
// These are the pins for ESP8266 boards
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
#define TFT_SCLK 18
|
||||
|
||||
#define TFT_CS 27
|
||||
#define TFT_DC 32 // pin 26 for TTGO T4 v1.3 <<<<<<<<<<< Note
|
||||
#define TFT_DC 32 // pin 26 for TTGO T4 v1.1
|
||||
#define TFT_RST 5
|
||||
|
||||
#define LOAD_GLCD
|
||||
|
|
|
|||
|
|
@ -0,0 +1,198 @@
|
|||
// USER DEFINED SETTINGS
|
||||
// Set driver type, fonts to be loaded, pins used and SPI control method etc
|
||||
//
|
||||
// See the User_Setup_Select.h file if you wish to be able to define multiple
|
||||
// setups and then easily select which setup file is used by the compiler.
|
||||
//
|
||||
// If this file is edited correctly then all the library example sketches should
|
||||
// run without the need to make any more changes for a particular hardware setup!
|
||||
// Note that some sketches are designed for a particular TFT pixel width/height
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 1. Call up the right driver file and any options for it
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// Tell the library to use 8 bit parallel mode (otherwise SPI is assumed)
|
||||
//#define TFT_PARALLEL_8_BIT
|
||||
//#define RP2040_PIO_SPI
|
||||
// Display type - only define if RPi display
|
||||
//#define RPI_DISPLAY_TYPE // 20MHz maximum SPI
|
||||
|
||||
// Only define one driver, the other ones must be commented out
|
||||
#define ILI9341_DRIVER
|
||||
//#define ST7735_DRIVER // Define additional parameters below for this display
|
||||
//#define ILI9163_DRIVER // Define additional parameters below for this display
|
||||
//#define S6D02A1_DRIVER
|
||||
//#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
|
||||
//#define HX8357D_DRIVER
|
||||
//#define ILI9481_DRIVER
|
||||
//#define ILI9486_DRIVER
|
||||
//#define ILI9488_DRIVER // WARNING: Do not connect ILI9488 display SDO to MISO if other devices share the SPI bus (TFT SDO does NOT tristate when CS is high)
|
||||
//#define ST7789_DRIVER // Full configuration option, define additional parameters below for this display
|
||||
//#define ST7789_2_DRIVER // Minimal configuration option, define additional parameters below for this display
|
||||
//#define R61581_DRIVER
|
||||
//#define RM68140_DRIVER
|
||||
//#define ST7796_DRIVER
|
||||
//#define SSD1963_480_DRIVER
|
||||
//#define SSD1963_800_DRIVER
|
||||
//#define SSD1963_800ALT_DRIVER
|
||||
//#define ILI9225_DRIVER
|
||||
|
||||
// Some displays support SPI reads via the MISO pin, other displays have a single
|
||||
// bi-directional SDA pin and the library will try to read this via the MOSI line.
|
||||
// To use the SDA line for reading data from the TFT uncomment the following line:
|
||||
|
||||
// #define TFT_SDA_READ // This option is for ESP32 ONLY, tested with ST7789 display only
|
||||
|
||||
// For ST7735, ST7789 and ILI9341 ONLY, define the colour order IF the blue and red are swapped on your display
|
||||
// Try ONE option at a time to find the correct colour order for your display
|
||||
|
||||
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
|
||||
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
|
||||
|
||||
// For ST7789, ST7735 and ILI9163 ONLY, define the pixel width and height in portrait orientation
|
||||
// #define TFT_WIDTH 80
|
||||
// #define TFT_WIDTH 128
|
||||
// #define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320
|
||||
// #define TFT_HEIGHT 160
|
||||
// #define TFT_HEIGHT 128
|
||||
// #define TFT_HEIGHT 240 // ST7789 240 x 240
|
||||
// #define TFT_HEIGHT 320 // ST7789 240 x 320
|
||||
|
||||
// For ST7735 ONLY, define the type of display, originally this was based on the
|
||||
// colour of the tab on the screen protector film but this is not always true, so try
|
||||
// out the different options below if the screen does not display graphics correctly,
|
||||
// e.g. colours wrong, mirror images, or tray pixels at the edges.
|
||||
// Comment out ALL BUT ONE of these options for a ST7735 display driver, save this
|
||||
// this User_Setup file, then rebuild and upload the sketch to the board again:
|
||||
|
||||
// #define ST7735_INITB
|
||||
// #define ST7735_GREENTAB
|
||||
// #define ST7735_GREENTAB2
|
||||
// #define ST7735_GREENTAB3
|
||||
// #define ST7735_GREENTAB128 // For 128 x 128 display
|
||||
// #define ST7735_GREENTAB160x80 // For 160 x 80 display (BGR, inverted, 26 offset)
|
||||
// #define ST7735_REDTAB
|
||||
// #define ST7735_BLACKTAB
|
||||
// #define ST7735_REDTAB160x80 // For 160 x 80 display with 24 pixel offset
|
||||
|
||||
// If colours are inverted (white shows as black) then uncomment one of the next
|
||||
// 2 lines try both options, one of the options should correct the inversion.
|
||||
|
||||
// #define TFT_INVERSION_ON
|
||||
// #define TFT_INVERSION_OFF
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 2. Define the pins that are used to interface with the display here
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// If a backlight control signal is available then define the TFT_BL pin in Section 2
|
||||
// below. The backlight will be turned ON when tft.begin() is called, but the library
|
||||
// needs to know if the LEDs are ON with the pin HIGH or LOW. If the LEDs are to be
|
||||
// driven with a PWM signal or turned OFF/ON then this must be handled by the user
|
||||
// sketch. e.g. with digitalWrite(TFT_BL, LOW);
|
||||
|
||||
// #define TFT_BL 32 // LED back-light control pin
|
||||
// #define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW)
|
||||
|
||||
// We must use hardware SPI, a minimum of 3 GPIO pins is needed.
|
||||
// Typical setup for the RP2040 is :
|
||||
//
|
||||
// Display SDO/MISO to RP2040 pin D0 (or leave disconnected if not reading TFT)
|
||||
// Display LED to RP2040 pin 3V3 or 5V
|
||||
// Display SCK to RP2040 pin D2
|
||||
// Display SDI/MOSI to RP2040 pin D3
|
||||
// Display DC (RS/AO)to RP2040 pin D18 (can use another pin if desired)
|
||||
// Display RESET to RP2040 pin D19 (can use another pin if desired)
|
||||
// Display CS to RP2040 pin D20 (can use another pin if desired, or GND, see below)
|
||||
// Display GND to RP2040 pin GND (0V)
|
||||
// Display VCC to RP2040 5V or 3.3V (5v if display has a 5V to 3.3V regulator fitted)
|
||||
//
|
||||
// The DC (Data Command) pin may be labelled AO or RS (Register Select)
|
||||
//
|
||||
// With some displays such as the ILI9341 the TFT CS pin can be connected to GND if no more
|
||||
// SPI devices (e.g. an SD Card) are connected, in this case comment out the #define TFT_CS
|
||||
// line below so it is NOT defined. Other displays such at the ST7735 require the TFT CS pin
|
||||
// to be toggled during setup, so in these cases the TFT_CS line must be defined and connected.
|
||||
|
||||
// The TFT_eSPI library always uses GPIO numbers, this means the following pin designators
|
||||
// must be used dependant on the RP2040 board package loaded
|
||||
// For the Arduino Mbed package the GPIO numbers must be used prefixed with p:
|
||||
#ifdef ARDUINO_ARCH_MBED
|
||||
#define TFT_MISO p4 // Arduino pin D12
|
||||
#define TFT_MOSI p7 // Arduino pin D11
|
||||
#define TFT_SCLK p6 // Arduino pin D13
|
||||
#define TFT_CS p5 // Arduino pin D10
|
||||
#define TFT_DC p20 // Arduino pin D8
|
||||
#define TFT_RST p21 // Arduino pin D9
|
||||
#define TOUCH_CS p19 // Arduino pin D7
|
||||
#else // For Earle Philhower's package the Arduino Dx pin designations must be used:
|
||||
#define TFT_MISO D12
|
||||
#define TFT_MOSI D11
|
||||
#define TFT_SCLK D13
|
||||
#define TFT_CS D10 // Chip select control pin
|
||||
#define TFT_DC D8 // Data Command control pin
|
||||
#define TFT_RST D9 // Reset pin (could connect to Arduino RESET pin)
|
||||
#define TOUCH_CS D7
|
||||
#endif
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 3. Define the fonts that are to be used here
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// Comment out the #defines below with // to stop that font being loaded
|
||||
// The ESP8366 and ESP32 have plenty of memory so commenting out fonts is not
|
||||
// normally necessary. If all fonts are loaded the extra FLASH space required is
|
||||
// about 17Kbytes. To save FLASH space only enable the fonts you need!
|
||||
|
||||
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
||||
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
||||
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
||||
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
||||
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
|
||||
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
||||
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
||||
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
||||
|
||||
// Comment out the #define below to stop the SPIFFS filing system and smooth font code being loaded
|
||||
// this will save ~20kbytes of FLASH
|
||||
#define SMOOTH_FONT
|
||||
|
||||
|
||||
// ##################################################################################
|
||||
//
|
||||
// Section 4. Other options
|
||||
//
|
||||
// ##################################################################################
|
||||
|
||||
// For the RP2040 processor define the SPI port channel used, default is 0
|
||||
// #define TFT_SPI_PORT 1 // Set to 0 if SPI0 pins are used, or 1 if spi1 pins used
|
||||
|
||||
// Define the SPI clock frequency, this affects the graphics rendering speed. Too
|
||||
// fast and the TFT driver will not keep up and display corruption appears.
|
||||
// With an ILI9341 display 40MHz works OK, 80MHz sometimes fails
|
||||
// With a ST7735 display more than 27MHz may not work (spurious pixels and lines)
|
||||
// With an ILI9163 display 27 MHz works OK.
|
||||
|
||||
// #define SPI_FREQUENCY 1000000
|
||||
// #define SPI_FREQUENCY 5000000
|
||||
// #define SPI_FREQUENCY 10000000
|
||||
// #define SPI_FREQUENCY 20000000
|
||||
// #define SPI_FREQUENCY 32000000
|
||||
#define SPI_FREQUENCY 70000000
|
||||
|
||||
// Optional reduced SPI frequency for reading TFT
|
||||
#define SPI_READ_FREQUENCY 20000000
|
||||
|
||||
// The XPT2046 requires a lower SPI clock rate of 2.5MHz so we define that here:
|
||||
#define SPI_TOUCH_FREQUENCY 2500000
|
||||
|
||||
|
|
@ -1,6 +1,6 @@
|
|||
{
|
||||
"name": "TFT_eSPI",
|
||||
"version": "2.4.26",
|
||||
"version": "2.4.27",
|
||||
"keywords": "Arduino, tft, ePaper, display, Pico, RP2040, STM32, ESP8266, NodeMCU, ESP32, M5Stack, ILI9341, ST7735, ILI9163, S6D02A1, ILI9481, ILI9486, ILI9488, ST7789, RM68140, SSD1351, SSD1963, ILI9225, HX8357D",
|
||||
"description": "A TFT and ePaper SPI graphics library with optimisation for Raspberry Pi Pico, ESP8266, ESP32 and STM32",
|
||||
"repository":
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
name=TFT_eSPI
|
||||
version=2.4.26
|
||||
version=2.4.27
|
||||
author=Bodmer
|
||||
maintainer=Bodmer
|
||||
sentence=TFT graphics library for Arduino processors with performance optimisation for RP2040, STM32, ESP8266 and ESP32
|
||||
|
|
|
|||
Loading…
Reference in New Issue