Seich
/
TFT_eSPI
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added T-HMI support 

Signed-off-by: lbuque <1102390310@qq.com>
This commit is contained in:
lbuque 2023-01-13 16:51:54 +08:00
parent 954a3a5ed3
commit dfd32378c1
1 changed files with 63 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
User_Setups/Setup207_LilyGo_T_HMI.h Normal file
View File

@ -0,0 +1,63 @@
// ST7789 240 x 240 display with no chip select line
#define USER_SETUP_ID 24
#define ST7789_DRIVER // Configure all registers
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
#define TFT_WIDTH 240 // ST7789 172 x 320
#define TFT_HEIGHT 320 // ST7789 240 x 320
#define CGRAM_OFFSET
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
// #define TFT_INVERSION_ON
#define TFT_INVERSION_OFF
#define TFT_PARALLEL_8_BIT
// The ESP32 and TFT the pins used for testing are:
#define TFT_CS 6 // Chip select control pin (library pulls permanently low
#define TFT_DC 7 // Data Command control pin - must use a pin in the range 0-31
#define TFT_RST -1 // Reset pin, toggles on startup
#define TFT_WR 8 // Write strobe control pin - must use a pin in the range 0-31
#define TFT_RD -1 // Read strobe control pin
#define TFT_DATA_PIN_OFFSET_EN /* The ESP32S3 controller is controlled by two registers. \
Select data pin numbers higher than 32 to enable this option, \
this macro definition added by Micky -20220701 */
#define TFT_D0 48 // Must use pins in the range 0-31 for the data bus
#define TFT_D1 47 // so a single register write sets/clears all bits.
#define TFT_D2 39 // Pins can be randomly assigned, this does not affect
#define TFT_D3 40 // TFT screen update performance.
#define TFT_D4 41
#define TFT_D5 42
#define TFT_D6 45
#define TFT_D7 46
#define TFT_BL 38 // LED back-light (required for M5Stack)
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
// #define SPI_FREQUENCY 27000000
// #define SPI_FREQUENCY 40000000
// #define SPI_READ_FREQUENCY 20000000
// #define SPI_TOUCH_FREQUENCY 2500000
// #define SUPPORT_TRANSACTIONS