From 96d1de7f92127054c82ed8a32ea58d2ef10b5b8d Mon Sep 17 00:00:00 2001 From: Djair Guilherme Date: Tue, 31 Aug 2021 19:35:10 -0300 Subject: [PATCH] Create Setup61_RP2040_GC9A01.h Adding setup file to Raspberry Pi Pico with GC9A01 Round display. --- User_Setups/Setup61_RP2040_GC9A01.h | 45 +++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 User_Setups/Setup61_RP2040_GC9A01.h diff --git a/User_Setups/Setup61_RP2040_GC9A01.h b/User_Setups/Setup61_RP2040_GC9A01.h new file mode 100644 index 0000000..a9e3738 --- /dev/null +++ b/User_Setups/Setup61_RP2040_GC9A01.h @@ -0,0 +1,45 @@ +// USER DEFINED SETTINGS +// Set driver type, fonts to be loaded, pins used and SPI control method etc +// +// See the User_Setup_Select.h file if you wish to be able to define multiple +// setups and then easily select which setup file is used by the compiler. +// +// If this file is edited correctly then all the library example sketches should +// run without the need to make any more changes for a particular hardware setup! +// Note that some sketches are designed for a particular TFT pixel width/height + +#define GC9A01_DRIVER // Round TFT SPI Display + +#define TFT_WIDTH 240 // ST7789 240 x 240 and 240 x 320 +#define TFT_HEIGHT 240 // GC9A01 240 x 240 + +#define TFT_MISO 0 // RX PIN - Not Connected +#define TFT_SCLK 2 +#define TFT_MOSI 3 // TX PIN +#define TFT_CS 20 // Chip select control pin +#define TFT_DC 18 // Data Command control pin +#define TFT_RST 19 // Reset pin (could connect to Arduino RESET pin) + +#define TFT_BL 17 // LED back-light control pin +#define TFT_BACKLIGHT_ON HIGH // Level to turn ON back-light (HIGH or LOW) + +#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH +#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters +#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters +#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm +#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. +#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. +#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts + +#define SMOOTH_FONT +#define PIXEL_DOUBLE // Testando + +#define SPI_FREQUENCY 27000000 +//#define SPI_FREQUENCY 40000000 + +// Optional reduced SPI frequency for reading TFT +#define SPI_READ_FREQUENCY 20000000 + +// Optional reduced SPI frequency for reading TFT +#define SPI_READ_FREQUENCY 5000000 +// #define SPI_TOUCH_FREQUENCY 2500000 - Copy from Setup200_GC9A01