Added ST7789 initialization
This commit is contained in:
Andriy Makukha
parent
73c1831e7b
commit
8eefc6f26e
|
|
@ -1,7 +1,11 @@
|
||||||
// Change the width and height if required (defined in portrait mode)
|
// Change the width and height if required (defined in portrait mode)
|
||||||
// or use the constructor to over-ride defaults
|
// or use the constructor to over-ride defaults
|
||||||
|
#ifndef TFT_WIDTH
|
||||||
#define TFT_WIDTH 240
|
#define TFT_WIDTH 240
|
||||||
#define TFT_HEIGHT 240
|
#endif
|
||||||
|
#ifndef TFT_HEIGHT
|
||||||
|
#define TFT_HEIGHT 320
|
||||||
|
#endif
|
||||||
|
|
||||||
#define CGRAM_OFFSET
|
#define CGRAM_OFFSET
|
||||||
|
|
||||||
|
|
@ -15,25 +19,20 @@
|
||||||
|
|
||||||
#define TFT_SLPIN 0x10
|
#define TFT_SLPIN 0x10
|
||||||
#define TFT_SLPOUT 0x11
|
#define TFT_SLPOUT 0x11
|
||||||
|
|
||||||
#define TFT_NORON 0x13
|
#define TFT_NORON 0x13
|
||||||
|
|
||||||
#define TFT_INVOFF 0x20
|
#define TFT_INVOFF 0x20
|
||||||
#define TFT_INVON 0x21
|
#define TFT_INVON 0x21
|
||||||
|
|
||||||
#define TFT_DISPOFF 0x28
|
#define TFT_DISPOFF 0x28
|
||||||
#define TFT_DISPON 0x29
|
#define TFT_DISPON 0x29
|
||||||
|
|
||||||
#define TFT_CASET 0x2A
|
#define TFT_CASET 0x2A
|
||||||
#define TFT_PASET 0x2B
|
#define TFT_PASET 0x2B
|
||||||
#define TFT_RAMWR 0x2C
|
#define TFT_RAMWR 0x2C
|
||||||
|
|
||||||
#define TFT_RAMRD 0x2E
|
#define TFT_RAMRD 0x2E
|
||||||
|
|
||||||
#define TFT_MADCTL 0x36
|
#define TFT_MADCTL 0x36
|
||||||
|
|
||||||
#define TFT_COLMOD 0x3A
|
#define TFT_COLMOD 0x3A
|
||||||
|
|
||||||
|
// Flags for TFT_MADCTL
|
||||||
#define TFT_MAD_MY 0x80
|
#define TFT_MAD_MY 0x80
|
||||||
#define TFT_MAD_MX 0x40
|
#define TFT_MAD_MX 0x40
|
||||||
#define TFT_MAD_MV 0x20
|
#define TFT_MAD_MV 0x20
|
||||||
|
|
@ -46,4 +45,79 @@
|
||||||
|
|
||||||
#define TFT_IDXRD 0x00 // ILI9341 only, indexed control register read
|
#define TFT_IDXRD 0x00 // ILI9341 only, indexed control register read
|
||||||
|
|
||||||
|
// ST7789 specific commands used in init
|
||||||
|
#define ST7789_NOP 0x00
|
||||||
|
#define ST7789_SWRESET 0x01
|
||||||
|
#define ST7789_RDDID 0x04
|
||||||
|
#define ST7789_RDDST 0x09
|
||||||
|
|
||||||
|
#define ST7789_RDDPM 0x0A // Read display power mode
|
||||||
|
#define ST7789_RDD_MADCTL 0x0B // Read display MADCTL
|
||||||
|
#define ST7789_RDD_COLMOD 0x0C // Read display pixel format
|
||||||
|
#define ST7789_RDDIM 0x0D // Read display image mode
|
||||||
|
#define ST7789_RDDSM 0x0E // Read display signal mode
|
||||||
|
#define ST7789_RDDSR 0x0F // Read display self-diagnostic result (ST7789V)
|
||||||
|
|
||||||
|
#define ST7789_SLPIN 0x10
|
||||||
|
#define ST7789_SLPOUT 0x11
|
||||||
|
#define ST7789_PTLON 0x12
|
||||||
|
#define ST7789_NORON 0x13
|
||||||
|
|
||||||
|
#define ST7789_INVOFF 0x20
|
||||||
|
#define ST7789_INVON 0x21
|
||||||
|
#define ST7789_GAMSET 0x26 // Gamma set
|
||||||
|
#define ST7789_DISPOFF 0x28
|
||||||
|
#define ST7789_DISPON 0x29
|
||||||
|
#define ST7789_CASET 0x2A
|
||||||
|
#define ST7789_RASET 0x2B
|
||||||
|
#define ST7789_RAMWR 0x2C
|
||||||
|
#define ST7789_RGBSET 0x2D // Color setting for 4096, 64K and 262K colors
|
||||||
|
#define ST7789_RAMRD 0x2E
|
||||||
|
|
||||||
|
#define ST7789_PTLAR 0x30
|
||||||
|
#define ST7789_VSCRDEF 0x33 // Vertical scrolling definition (ST7789V)
|
||||||
|
#define ST7789_TEOFF 0x34 // Tearing effect line off
|
||||||
|
#define ST7789_TEON 0x35 // Tearing effect line on
|
||||||
|
#define ST7789_MADCTL 0x36 // Memory data access control
|
||||||
|
#define ST7789_IDMOFF 0x38 // Idle mode off
|
||||||
|
#define ST7789_IDMON 0x39 // Idle mode on
|
||||||
|
#define ST7789_RAMWRC 0x3C // Memory write continue (ST7789V)
|
||||||
|
#define ST7789_RAMRDC 0x3E // Memory read continue (ST7789V)
|
||||||
|
#define ST7789_COLMOD 0x3A
|
||||||
|
|
||||||
|
#define ST7789_RAMCTRL 0xB0 // RAM control
|
||||||
|
#define ST7789_RGBCTRL 0xB1 // RGB control
|
||||||
|
#define ST7789_PORCTRL 0xB2 // Porch control
|
||||||
|
#define ST7789_FRCTRL1 0xB3 // Frame rate control
|
||||||
|
#define ST7789_PARCTRL 0xB5 // Partial mode control
|
||||||
|
#define ST7789_GCTRL 0xB7 // Gate control
|
||||||
|
#define ST7789_GTADJ 0xB8 // Gate on timing adjustment
|
||||||
|
#define ST7789_DGMEN 0xBA // Digital gamma enable
|
||||||
|
#define ST7789_VCOMS 0xBB // VCOMS setting
|
||||||
|
#define ST7789_LCMCTRL 0xC0 // LCM control
|
||||||
|
#define ST7789_IDSET 0xC1 // ID setting
|
||||||
|
#define ST7789_VDVVRHEN 0xC2 // VDV and VRH command enable
|
||||||
|
#define ST7789_VRHS 0xC3 // VRH set
|
||||||
|
#define ST7789_VDVSET 0xC4 // VDV setting
|
||||||
|
#define ST7789_VCMOFSET 0xC5 // VCOMS offset set
|
||||||
|
#define ST7789_FRCTR2 0xC6 // FR Control 2
|
||||||
|
#define ST7789_CABCCTRL 0xC7 // CABC control
|
||||||
|
#define ST7789_REGSEL1 0xC8 // Register value section 1
|
||||||
|
#define ST7789_REGSEL2 0xCA // Register value section 2
|
||||||
|
#define ST7789_PWMFRSEL 0xCC // PWM frequency selection
|
||||||
|
#define ST7789_PWCTRL1 0xD0 // Power control 1
|
||||||
|
#define ST7789_VAPVANEN 0xD2 // Enable VAP/VAN signal output
|
||||||
|
#define ST7789_CMD2EN 0xDF // Command 2 enable
|
||||||
|
#define ST7789_PVGAMCTRL 0xE0 // Positive voltage gamma control
|
||||||
|
#define ST7789_NVGAMCTRL 0xE1 // Negative voltage gamma control
|
||||||
|
#define ST7789_DGMLUTR 0xE2 // Digital gamma look-up table for red
|
||||||
|
#define ST7789_DGMLUTB 0xE3 // Digital gamma look-up table for blue
|
||||||
|
#define ST7789_GATECTRL 0xE4 // Gate control
|
||||||
|
#define ST7789_SPI2EN 0xE7 // SPI2 enable
|
||||||
|
#define ST7789_PWCTRL2 0xE8 // Power control 2
|
||||||
|
#define ST7789_EQCTRL 0xE9 // Equalize time control
|
||||||
|
#define ST7789_PROMCTRL 0xEC // Program control
|
||||||
|
#define ST7789_PROMEN 0xFA // Program mode enable
|
||||||
|
#define ST7789_NVMSET 0xFC // NVM setting
|
||||||
|
#define ST7789_PROMACT 0xFE // Program action
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,24 +1,120 @@
|
||||||
|
|
||||||
// This is the command sequence that initialises the ST7789 driver
|
// This is the command sequence that initialises the ST7789 driver
|
||||||
|
//
|
||||||
// Configure ST7789 display
|
// This setup information uses simple 8 bit SPI writecommand() and writedata() functions
|
||||||
|
//
|
||||||
|
// See ST7735_Setup.h file for an alternative format
|
||||||
|
|
||||||
{
|
{
|
||||||
static const uint8_t PROGMEM
|
writecommand(ST7789_SLPOUT); // Sleep out
|
||||||
st7789[] = {
|
delay(120);
|
||||||
9,
|
|
||||||
TFT_SWRST, TFT_INIT_DELAY, 150,
|
|
||||||
TFT_SLPOUT, TFT_INIT_DELAY, 255,
|
|
||||||
TFT_COLMOD, 1+TFT_INIT_DELAY, 0x55, 10,
|
|
||||||
TFT_MADCTL, 1, TFT_MAD_RGB,
|
|
||||||
TFT_CASET, 4, 0x00, 0x00, 0x00, 0xF0,
|
|
||||||
TFT_PASET, 4, 0x00, 0x00, 0x00, 0xF0,
|
|
||||||
TFT_INVON, TFT_INIT_DELAY, 10,
|
|
||||||
TFT_NORON, TFT_INIT_DELAY, 10,
|
|
||||||
TFT_DISPON, TFT_INIT_DELAY, 255
|
|
||||||
};
|
|
||||||
|
|
||||||
commandList(st7789);
|
writecommand(ST7789_NORON); // Normal display mode on
|
||||||
|
|
||||||
|
//------------------------------display and color format setting--------------------------------//
|
||||||
|
writecommand(ST7789_MADCTL);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x48);
|
||||||
|
|
||||||
|
// JLX240 display datasheet
|
||||||
|
writecommand(0xB6);
|
||||||
|
writedata(0x0A);
|
||||||
|
writedata(0x82);
|
||||||
|
|
||||||
|
writecommand(ST7789_COLMOD);
|
||||||
|
writedata(0x55);
|
||||||
|
|
||||||
|
//--------------------------------ST7789V Frame rate setting----------------------------------//
|
||||||
|
writecommand(ST7789_PORCTRL);
|
||||||
|
writedata(0x0c);
|
||||||
|
writedata(0x0c);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x33);
|
||||||
|
writedata(0x33);
|
||||||
|
|
||||||
|
writecommand(ST7789_GCTRL); // Voltages: VGH / VGL
|
||||||
|
writedata(0x35);
|
||||||
|
|
||||||
|
//---------------------------------ST7789V Power setting--------------------------------------//
|
||||||
|
writecommand(ST7789_VCOMS);
|
||||||
|
writedata(0x28); // JLX240 display datasheet
|
||||||
|
|
||||||
|
writecommand(ST7789_LCMCTRL);
|
||||||
|
writedata(0x0C);
|
||||||
|
|
||||||
|
writecommand(ST7789_VDVVRHEN);
|
||||||
|
writedata(0x01);
|
||||||
|
writedata(0xFF);
|
||||||
|
|
||||||
|
writecommand(ST7789_VRHS); // voltage VRHS
|
||||||
|
writedata(0x10);
|
||||||
|
|
||||||
|
writecommand(ST7789_VDVSET);
|
||||||
|
writedata(0x20);
|
||||||
|
|
||||||
|
writecommand(ST7789_FRCTR2);
|
||||||
|
writedata(0x0f);
|
||||||
|
|
||||||
|
writecommand(ST7789_PWCTRL1);
|
||||||
|
writedata(0xa4);
|
||||||
|
writedata(0xa1);
|
||||||
|
|
||||||
|
//--------------------------------ST7789V gamma setting---------------------------------------//
|
||||||
|
writecommand(ST7789_PVGAMCTRL);
|
||||||
|
writedata(0xd0);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x02);
|
||||||
|
writedata(0x07);
|
||||||
|
writedata(0x0a);
|
||||||
|
writedata(0x28);
|
||||||
|
writedata(0x32);
|
||||||
|
writedata(0x44);
|
||||||
|
writedata(0x42);
|
||||||
|
writedata(0x06);
|
||||||
|
writedata(0x0e);
|
||||||
|
writedata(0x12);
|
||||||
|
writedata(0x14);
|
||||||
|
writedata(0x17);
|
||||||
|
|
||||||
|
writecommand(ST7789_NVGAMCTRL);
|
||||||
|
writedata(0xd0);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x02);
|
||||||
|
writedata(0x07);
|
||||||
|
writedata(0x0a);
|
||||||
|
writedata(0x28);
|
||||||
|
writedata(0x31);
|
||||||
|
writedata(0x54);
|
||||||
|
writedata(0x47);
|
||||||
|
writedata(0x0e);
|
||||||
|
writedata(0x1c);
|
||||||
|
writedata(0x17);
|
||||||
|
writedata(0x1b);
|
||||||
|
writedata(0x1e);
|
||||||
|
|
||||||
|
writecommand(ST7789_INVOFF);
|
||||||
|
|
||||||
|
writecommand(ST7789_CASET); // Column address set
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0xE5); // 239
|
||||||
|
|
||||||
|
writecommand(ST7789_RASET); // Row address set
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x00);
|
||||||
|
writedata(0x01);
|
||||||
|
writedata(0x3F); // 319
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
|
spi_end();
|
||||||
|
delay(120);
|
||||||
|
spi_begin();
|
||||||
|
|
||||||
|
writecommand(ST7789_DISPON); //Display on
|
||||||
|
|
||||||
|
// Turn on the back-light LED
|
||||||
|
digitalWrite(TFT_BL, HIGH);
|
||||||
|
pinMode(TFT_BL, OUTPUT);
|
||||||
}
|
}
|
||||||
// End of ST7789 display configuration
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -35,11 +35,7 @@
|
||||||
#define SPI_READ_FREQUENCY SPI_FREQUENCY
|
#define SPI_READ_FREQUENCY SPI_FREQUENCY
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef ST7789_DRIVER
|
|
||||||
#define TFT_SPI_MODE SPI_MODE3
|
|
||||||
#else
|
|
||||||
#define TFT_SPI_MODE SPI_MODE0
|
#define TFT_SPI_MODE SPI_MODE0
|
||||||
#endif
|
|
||||||
|
|
||||||
// If the frequency is not defined, set a default
|
// If the frequency is not defined, set a default
|
||||||
#ifndef SPI_TOUCH_FREQUENCY
|
#ifndef SPI_TOUCH_FREQUENCY
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue