This commit is contained in:
JamesNewton 2018-02-08 01:11:04 +00:00 committed by GitHub
commit 27ea24d425
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 9 additions and 9 deletions

View File

@ -53,11 +53,11 @@
// Display LED to NodeMCU pin VIN (or 5V, see below)
// Display SCK to NodeMCU pin CLK
// Display SDI/MOSI to NodeMCU pin SD1
// Display DC (or AO)to NodeMCU pin D5
// Display RESET to NodeMCU pin D4 (or RST, see below)
// Display CS to NodeMCU pin D3
// Display DC (or AO)to NodeMCU pin D5 / GPIO 14
// Display RESET to NodeMCU pin D4 / GPIO 2 (or RST, see below)
// Display CS to NodeMCU pin D3 / GPIO 0
// Display GND to NodeMCU pin GND (0V)
// Display VCC to NodeMCU 5V or 3.3V
// Display VCC to NodeMCU 5V (Vin) or 3.3V
//
// The TFT RESET pin can be connected to the NodeMCU RST pin or 3.3V to free up a control pin
//
@ -72,10 +72,11 @@
// ###### EDIT THE PIN NUMBERS IN THE LINES FOLLOWING TO SUIT YOUR SETUP ######
// ModeMCU
// Do not define TFT_CS in overlap mode, TFT chip select must connect to pin D3
#define TFT_CS PIN_D3
#define TFT_DC PIN_D5 // Data Command control pin
#define TFT_RST PIN_D4 // Reset pin (could connect to NodeMCU RST, see next line)
#define TFT_SPI_OVERLAP
// TFT_CS (chip select) must connect to pin D3 in overlap mode.
#define TFT_CS PIN_D3 // GPIO 0
#define TFT_DC PIN_D5 // GPIO 14 Data Command control pin
#define TFT_RST PIN_D4 // GPIO 2 Reset pin (could connect to NodeMCU RST, see next line)
//#define TFT_RST -1 // Set TFT_RST to -1 if the display RESET is connected to NodeMCU RST or 3.3V
// ESP32 Dev board
@ -160,4 +161,3 @@
// TFT MISO to GPIO7/SDD0 (pin SD0 on a NodeMCU) - does not need to be connected
// TFT SCK to GPIO6/SDCLK (pin CLK on a NodeMCU)
#define TFT_SPI_OVERLAP