## AccessoryInformation (3E)

Required Identification Information. For each Accessory in a HomeSpan device this must be included as the first Service.

Characteristic	Format	Perms	Min	Max	Values
Identify (14) the Home App sets this to RUN_ID when it wants the device to run its identification routine	bool	PW	0	1	IDLE (0) RUN_ID (1)
FirmwareRevision (52) must be in form x[.y[.z]] - informational only	string	PR+EV	-	-	"1.0.0"
Manufacturer (20) any string - informational only	string	PR	-	-	"HomeSpan"
Model (21) any string - informational only	string	PR	-	-	"HomeSpan-ESP32"
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
SerialNumber (30)	string	PR	-	-	"HS-12345"
HardwareRevision (53) must be in form x[.y[.z]] - informational only	string	PR	-	-	"1.0.0"

## AirPurifier (BB)

Defines a basic Air Purifier with an optional fan. Optional Linked Services: FilterMaintenance, AirQualitySensor, Fan, and Slat

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
CurrentAirPurifierState (A9) indicates current state of air purification	uint8	PR+EV	0	2	INACTIVE (0) IDLE (1) PURIFYING (2)
TargetAirPurifierState (A8)	uint8	PW+PR+EV	0	1	MANUAL (0) AUTO (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
RotationSpeed (29)	float	PR+PW+EV	0	100	0
SwingMode (B6)	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
LockPhysicalControls (A7) indicates if local control lock is enabled	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## AirQualitySensor (8D)

Defines an Air Quality Sensor.

Characteristic	Format	Perms	Min	Max	Values
AirQuality (95) a subjective description	uint8	PR+EV	0	5	UNKNOWN (0) EXCELLENT (1) GOOD (2) FAIR (3) INFERIOR (4) POOR (5)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
OzoneDensity (C3) measured in µg/m³	float	PR+EV	0	1000	0
NitrogenDioxideDensity (C4) measured in µg/m³	float	PR+EV	0	1000	0
SulphurDioxideDensity (C5)	float	PR+EV	0	1000	0
PM25Density (C6) 2.5-micron particulate density, measured in µg/m³	float	PR+EV	0	1000	0
PM10Density (C7) 10-micron particulate density, measured in µg/m³	float	PR+EV	0	1000	0
VOCDensity (C8)	float	PR+EV	0	1000	0
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## BatteryService (96)

Defines a standalone Battery Service.

Characteristic	Format	Perms	Min	Max	Values
BatteryLevel (68) measured as a percentage	uint8	PR+EV	0	100	0
ChargingState (8F) indicates state of battery charging	uint8	PR+EV	0	2	NOT_CHARGING (0) CHARGING (1) NOT_CHARGEABLE (2)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## CarbonDioxideSensor (97)

Defines a Carbon Dioxide Sensor.

Characteristic	Format	Perms	Min	Max	Values
CarbonDioxideDetected (92) indicates if abnormal level is detected	uint8	PR+EV	0	1	NORMAL (0) ABNORMAL (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
CarbonDioxideLevel (93) measured on parts per million (ppm)	float	PR+EV	0	100000	0
CarbonDioxidePeakLevel (94) measured in parts per million (ppm)	float	PR+EV	0	100000	0

## CarbonMonoxideSensor (7F)

Defines a Carbon Monoxide Sensor.

Characteristic	Format	Perms	Min	Max	Values
CarbonMonoxideDetected (69) indicates if abnormal level is detected	uint8	PR+EV	0	1	NORMAL (0) ABNORMAL (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
CarbonMonoxideLevel (90) measured in parts per million (ppm)	float	PR+EV	0	100	0
CarbonMonoxidePeakLevel (91) measured in parts per million (ppm)	float	PR+EV	0	100	0

## ContactSensor (80)

Defines a Contact Sensor.

Characteristic	Format	Perms	Min	Max	Values
ContactSensorState (6A) indictates if contact is detected (i.e. closed)	uint8	PR+EV	0	1	DETECTED (0) NOT_DETECTED (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## Door (81)

Defines a motorized Door.

Characteristic	Format	Perms	Min	Max	Values
CurrentPosition (6D) current position (as a percentage) from fully closed (0) to full open (100)	uint8	PR+EV	0	100	0
TargetPosition (7C)	uint8	PW+PR+EV	0	100	0
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
ObstructionDetected (24) indicates if obstruction is detected	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)

## Doorbell (121)

Defines a Doorbell. Can be used on a standalone basis or in conjunction with a LockMechanism Service.

Characteristic	Format	Perms	Min	Max	Values
ProgrammableSwitchEvent (73)	uint8	PR+EV+NV	0	2	SINGLE_PRESS (0) DOUBLE_PRESS (1) LONG_PRESS (2)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## Fan (B7)

Defines a Fan. Can be used in conjunction with a LightBulb Service to create a Lighted Ceiling Fan.

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
CurrentFanState (AF) indicates current state of a fan	uint8	PR+EV	0	2	INACTIVE (0) IDLE (1) BLOWING (2)
TargetFanState (BF)	uint8	PW+PR+EV	0	1	MANUAL (0) AUTO (1)
RotationDirection (28)	int	PR+PW+EV	0	1	CLOCKWISE (0) COUNTERCLOCKWISE (1)
RotationSpeed (29)	float	PR+PW+EV	0	100	0
SwingMode (B6)	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
LockPhysicalControls (A7) indicates if local control lock is enabled	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## Faucet (D7)

Defines the master control for a multi-Valve appliance. Linked Services: Valve (at least one required), and HeaterCooler (optional).

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## FilterMaintenance (BA)

Defines a Filter Maintainence check.

Characteristic	Format	Perms	Min	Max	Values
FilterChangeIndication (AC) indicates state of filter	uint8	PR+EV	0	1	NO_CHANGE_NEEDED (0) CHANGE_NEEDED (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
FilterLifeLevel (AB) measures as a percentage of remaining life	float	PR+EV	0	100	0
ResetFilterIndication (AD)	uint8	PW	1	1	0

## GarageDoorOpener (41)

Defines a motorized Garage Door Opener.

Characteristic	Format	Perms	Min	Max	Values
CurrentDoorState (E) indicates current state of a door	uint8	PR+EV	0	4	OPEN (0) CLOSED (1) OPENING (2) CLOSING (3) STOPPED (4)
TargetDoorState (32)	uint8	PW+PR+EV	0	1	OPEN (0) CLOSED (1)
ObstructionDetected (24) indicates if obstruction is detected	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
LockCurrentState (1D) indictates state of a lock	uint8	PR+EV	0	3	UNLOCKED (0) LOCKED (1) JAMMED (2) UNKNOWN (3)
LockTargetState (1E) indicates desired state of lock	uint8	PW+PR+EV	0	1	UNLOCK (0) LOCK (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
Version (37)	string	PR	-	-	"1.0.0"

## HeaterCooler (BC)

Defines a standalone Heater, Cooler, or combined Heater/Cooler. Can be used with a separate Fan Service and/or Slat Service to extend functionality.

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
CurrentTemperature (11) current temperature measured in Celsius	float	PR+EV	0	100	0
CurrentHeaterCoolerState (B1) indicates whether appliance is currently heating, cooling, idle, or off	uint8	PR+EV	0	3	INACTIVE (0) IDLE (1) HEATING (2) COOLING (3)
TargetHeaterCoolerState (B2)	uint8	PW+PR+EV	0	2	AUTO (0) HEAT (1) COOL (2)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
RotationSpeed (29)	float	PR+PW+EV	0	100	0
TemperatureDisplayUnits (36)	uint8	PW+PR+EV	0	1	CELSIUS (0) FAHRENHEIT (1)
SwingMode (B6)	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
CoolingThresholdTemperature (D) cooling turns on when temperature (in Celsius) rises above this threshold	float	PR+PW+EV	10	35	10
HeatingThresholdTemperature (12) heating turns on when temperature (in Celsius) falls below this threshold	float	PR+PW+EV	0	25	16
LockPhysicalControls (A7) indicates if local control lock is enabled	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## HumidifierDehumidifier (BD)

Defines a Humidifer, Dehumidifier, or combined Humidifer/Dehumidifier. Can be used with a separate Fan Service and/or Slat Service to extend functionality.

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
CurrentRelativeHumidity (10) current humidity measured as a percentage	float	PR+EV	0	100	0
CurrentHumidifierDehumidifierState (B3) indicates current state of humidifier/dehumidifer	uint8	PR+EV	0	3	INACTIVE (0) IDLE (1) HUMIDIFYING (2) DEHUMIDIFYING (3)
TargetHumidifierDehumidifierState (B4)	uint8	PW+PR+EV	0	2	AUTO (0) HUMIDIFY (1) DEHUMIDIFY (2)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
RelativeHumidityDehumidifierThreshold (C9)	float	PR+PW+EV	0	100	50
RelativeHumidityHumidifierThreshold (CA)	float	PR+PW+EV	0	100	50
RotationSpeed (29)	float	PR+PW+EV	0	100	0
SwingMode (B6)	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
WaterLevel (B5)	float	PR+EV	0	100	0
LockPhysicalControls (A7) indicates if local control lock is enabled	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## HumiditySensor (82)

Defines a Humidity Sensor.

Characteristic	Format	Perms	Min	Max	Values
CurrentRelativeHumidity (10) current humidity measured as a percentage	float	PR+EV	0	100	0
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## InputSource (D9)

Defines an Input Source for a TV. Use only as a Linked Service for the Television Service.

Characteristic	Format	Perms	Min	Max	Values
ConfiguredName (E3)	string	PW+PR+EV	-	-	"unnamed"
IsConfigured (D6) indicates if a predefined Service has been configured	uint8	PR+EV	0	1	NOT_CONFIGURED (0) CONFIGURED (1)
Identifier (E6)	uint32	PR	0	255	0
CurrentVisibilityState (135)	uint8	PR+EV	0	1	0
TargetVisibilityState (134)	uint8	PW+PR+EV	0	1	0

## IrrigationSystem (CF)

Defines an Irrigation System. Linked Services: Valve Service (at least one required).

Characteristic	Format	Perms	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	1	INACTIVE (0) ACTIVE (1)
ProgramMode (D1)	uint8	PR+EV	2	NONE (0) SCHEDULED (1) SCHEDULE_OVERRIDEN (2)
InUse (D2) if Service is set to active, this indictes whether it is currently in use	uint8	PR+EV	1	NOT_IN_USE (0) IN_USE (1)
RemainingDuration (D4)	uint32	PR+EV	3600	60
StatusFault (77)	uint8	PR+EV	1	NO_FAULT (0) FAULT (1)

## LeakSensor (83)

Defines a Leak Sensor.

Characteristic	Format	Perms	Min	Max	Values
LeakDetected (70) indictates if a leak is detected	uint8	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## LightBulb (43)

Defines any type of Light.

Characteristic	Format	Perms	Min	Max	Values
On (25) indicates if the Service is active/on	bool	PR+PW+EV	0	1	OFF (0) ON (1)
Brightness (8) measured as a percentage	int	PR+PW+EV	0	100	0
Hue (13) color (in degrees) from red (0) to green (120) to blue (240) and back to red (360)	float	PR+PW+EV	0	360	0
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
Saturation (2F)	float	PR+PW+EV	0	100	0
ColorTemperature (CE) measured in inverse megaKelvin (= 1,000,000 / Kelvin)	uint32	PR+PW+EV	140	500	200

## LightSensor (84)

Defines a Light Sensor.

Characteristic	Format	Perms	Min	Max	Values
CurrentAmbientLightLevel (6B) measured in Lux (lumens/m²	float	PR+EV	0.0001	100000	1
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## LockMechanism (45)

Defines an electronic Lock.

Characteristic	Format	Perms	Min	Max	Values
LockCurrentState (1D) indictates state of a lock	uint8	PR+EV	0	3	UNLOCKED (0) LOCKED (1) JAMMED (2) UNKNOWN (3)
LockTargetState (1E) indicates desired state of lock	uint8	PW+PR+EV	0	1	UNLOCK (0) LOCK (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
Mute (11A) not used	bool	PW+PR+EV	0	1	OFF (0) ON (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
Volume (119)	uint8	PW+PR+EV	0	100	0

## MotionSensor (85)

Defines a Motion Sensor.

Characteristic	Format	Perms	Min	Max	Values
MotionDetected (22) indicates if motion is detected	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## OccupancySensor (86)

Defines and Occupancy Sensor.

Characteristic	Format	Perms	Min	Max	Values
OccupancyDetected (71) indicates if occupanccy is detected	uint8	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## Outlet (47)

Defines an controllable Outlet used to power any light or appliance.

Characteristic	Format	Perms	Min	Max	Values
On (25) indicates if the Service is active/on	bool	PR+PW+EV	0	1	OFF (0) ON (1)
OutletInUse (26) indicates if an appliance or light is plugged into the outlet, regardless of whether on or off	bool	PR+EV	0	1	NOT_IN_USE (0) IN_USE (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## SecuritySystem (7E)

Defines a Security System.

Characteristic	Format	Perms	Min	Max	Values
SecuritySystemCurrentState (66)	uint8	PR+EV	0	4	ARMED_STAY (0) ARMED_AWAY (1) ARMED_NIGHT (2) DISARMED (3) ALARM_TRIGGERED (4)
SecuritySystemTargetState (67)	uint8	PW+PR+EV	0	3	ARM_STAY (0) ARM_AWAY (1) ARM_NIGHT (2) DISARM (3)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
SecuritySystemAlarmType (8E)	uint8	PR+EV	0	1	KNOWN (0) UNKNOWN (1)
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
ServiceLabelNamespace (CD)	uint8	PR	0	1	DOTS (0) NUMERALS (1)

## Slat (B9)

Defines a motorized ventilation Slat(s).

Characteristic	Format	Perms	Min	Max	Values
CurrentSlatState (AA) indicates current state of slats	uint8	PR+EV	0	2	FIXED (0) JAMMED (1) SWINGING (2)
SlatType (C0)	uint8	PR	0	1	HORIZONTAL (0) VERTICAL (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
SwingMode (B6)	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
CurrentTiltAngle (C1) angle (in degrees) of slats from fully up or left (-90) to fully open (0) to fully down or right (90)	int	PR+EV	-90	90	0
TargetTiltAngle (C2)	int	PW+PR+EV	-90	90	0

## SmokeSensor (87)

Defines a Smoke Sensor.

Characteristic	Format	Perms	Min	Max	Values
SmokeDetected (76)	uint8	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
Mute (11A) not used	bool	PW+PR+EV	0	1	OFF (0) ON (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
Volume (119)	uint8	PW+PR+EV	0	100	0

## StatelessProgrammableSwitch (89)

Defines a "Stateless" Programmable Switch that can be used to trigger actions in the Home App.

Characteristic	Format	Perms	Min	Max	Values
ProgrammableSwitchEvent (73)	uint8	PR+EV+NV	0	2	SINGLE_PRESS (0) DOUBLE_PRESS (1) LONG_PRESS (2)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## Switch (49)

Defines a generic Switch.

Characteristic	Format	Perms	Min	Max	Values
On (25) indicates if the Service is active/on	bool	PR+PW+EV	0	1	OFF (0) ON (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## Television (D8)

Defines a TV. Optional Linked Services: InputSource and TelevisionSpeaker.

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
ConfiguredName (E3)	string	PW+PR+EV	-	-	"unnamed"
ActiveIdentifier (E7) the Identifier of the current Input Source	uint32	PW+PR+EV	0	255	0
RemoteKey (E1)	uint8	PW	0	16	0
PowerModeSelection (DF)	uint8	PW	0	1	0

## TelevisionSpeaker (113)

Defines a Television Speaker that can be controlled via the Remote Control widget on an iPhone. Use only as a Linked Service for the Television Service.

Characteristic	Format	Perms	Min	Max	Values
VolumeControlType (E9)	uint8	PR+EV	0	3	0
VolumeSelector (EA)	uint8	PW	0	1	0

## TemperatureSensor (8A)

Defines a Temperature Sensor.

Characteristic	Format	Perms	Min	Max	Values
CurrentTemperature (11) current temperature measured in Celsius	float	PR+EV	0	100	0
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
StatusActive (75)	bool	PR+EV	0	1	1
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered (7A)	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery (79)	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## Thermostat (4A)

Defines a Thermostat used to control a furnace, air conditioner, or both.

Characteristic	Format	Perms	Min	Max	Values
CurrentHeatingCoolingState (F) indicates whether appliance is currently heating, cooling, or just idle	uint8	PR+EV	0	2	IDLE (0) HEATING (1) COOLING (2)
TargetHeatingCoolingState (33)	uint8	PW+PR+EV	0	3	OFF (0) HEAT (1) COOL (2) AUTO (3)
CurrentTemperature (11) current temperature measured in Celsius	float	PR+EV	0	100	0
TargetTemperature (35)	float	PW+PR+EV	10	38	16
TemperatureDisplayUnits (36)	uint8	PW+PR+EV	0	1	CELSIUS (0) FAHRENHEIT (1)
CoolingThresholdTemperature (D) cooling turns on when temperature (in Celsius) rises above this threshold	float	PR+PW+EV	10	35	10
CurrentRelativeHumidity (10) current humidity measured as a percentage	float	PR+EV	0	100	0
HeatingThresholdTemperature (12) heating turns on when temperature (in Celsius) falls below this threshold	float	PR+PW+EV	0	25	16
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
TargetRelativeHumidity (34)	float	PW+PR+EV	0	100	0

## Valve (D0)

Defines an electronic Valve. Can be used standalone or as a Linked Service in conjunction with the Faucet and IrrigationSystem Services.

Characteristic	Format	Perms	Min	Max	Values
Active (B0) indicates if the Service is active/on	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
InUse (D2) if Service is set to active, this indictes whether it is currently in use	uint8	PR+EV	0	1	NOT_IN_USE (0) IN_USE (1)
ValveType (D5)	uint8	PR+EV	0	3	0
SetDuration (D3)	uint32	PW+PR+EV	0	3600	60
RemainingDuration (D4)	uint32	PR+EV	0	3600	60
IsConfigured (D6) indicates if a predefined Service has been configured	uint8	PR+EV	0	1	NOT_CONFIGURED (0) CONFIGURED (1)
StatusFault (77)	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"

## Window (8B)

Defines a motorized Window.

Characteristic	Format	Perms	Min	Max	Values
CurrentPosition (6D) current position (as a percentage) from fully closed (0) to full open (100)	uint8	PR+EV	0	100	0
TargetPosition (7C)	uint8	PW+PR+EV	0	100	0
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
ObstructionDetected (24) indicates if obstruction is detected	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)

## WindowCovering (8C)

Defines a motorized Window Shade, Screen, Awning, etc.

Characteristic	Format	Perms	Min	Max	Values
TargetPosition (7C)	uint8	PW+PR+EV	0	100	0
CurrentPosition (6D) current position (as a percentage) from fully closed (0) to full open (100)	uint8	PR+EV	0	100	0
Name (23) default name of a Service used only during initial pairing	string	PR	-	-	"unnamed"
CurrentHorizontalTiltAngle (6C) current angle (in degrees) of slats from fully up (-90) to fully open (0) to fully down (90)	int	PR+EV	-90	90	0
TargetHorizontalTiltAngle (7B)	int	PW+PR+EV	-90	90	0
CurrentVerticalTiltAngle (6E) current angle (in degrees) of slats from fully left (-90) to fully open (0) to fully right (90)	int	PR+EV	-90	90	0
TargetVerticalTiltAngle (7D)	int	PW+PR+EV	-90	90	0
ObstructionDetected (24) indicates if obstruction is detected	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)