## AccessoryInformation (3E)

Required Identification Information. For each Accessory in a HomeSpan device this must be included as the first Service.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Identify the Home App set this to RUN_ID when it wants the device to run its identification routine	14	bool	PW	0	1	IDLE (0) RUN_ID (1)
FirmwareRevision must be in form x[.y[.z]] - informational only	52	string	PR+EV	-	-	"1.0.0"
Manufacturer any string - informational only	20	string	PR	-	-	"HomeSpan"
Model any string - informational only	21	string	PR	-	-	"HomeSpan-ESP32"
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
SerialNumber	30	string	PR	-	-	"HS-12345"
HardwareRevision must be in form x[.y[.z]] - informational only	53	string	PR	-	-	"1.0.0"

## AirPurifier (BB)

Defines a basic Air Purifier with an optional fan. Optional Linked Services: FilterMaintenance, AirQualitySensor, Fan, and Slat

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
CurrentAirPurifierState indicates current state of air purification	A9	uint8	PR+EV	0	2	INACTIVE (0) IDLE (1) PURIFYING (2)
TargetAirPurifierState	A8	uint8	PW+PR+EV	0	1	MANUAL (0) AUTO (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
RotationSpeed	29	float	PR+PW+EV	0	100	0
SwingMode	B6	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
LockPhysicalControls indicates if local control lock is enabled	A7	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## AirQualitySensor (8D)

Defines an Air Quality Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
AirQuality a subjective description	95	uint8	PR+EV	0	5	UNKNOWN (0) EXCELLENT (1) GOOD (2) FAIR (3) INFERIOR (4) POOR (5)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
OzoneDensity measured in µg/m³	C3	float	PR+EV	0	1000	0
NitrogenDioxideDensity measured in µg/m³	C4	float	PR+EV	0	1000	0
SulphurDioxideDensity	C5	float	PR+EV	0	1000	0
PM25Density 2.5-micron particulate density, measured in µg/m³	C6	float	PR+EV	0	1000	0
PM10Density 10-micron particulate density, measured in µg/m³	C7	float	PR+EV	0	1000	0
VOCDensity	C8	float	PR+EV	0	1000	0
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## BatteryService (96)

Defines a standalone Battery Service.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
BatteryLevel measured as a percentage	68	uint8	PR+EV	0	100	0
ChargingState indicates state of battery charging	8F	uint8	PR+EV	0	2	NOT_CHARGING (0) CHARGING (1) NOT_CHARGEABLE (2)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## CarbonDioxideSensor (97)

Defines a Carbon Dioxide Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CarbonDioxideDetected indicates if abnormal level is detected	92	uint8	PR+EV	0	1	NORMAL (0) ABNORMAL (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
CarbonDioxideLevel measured on parts per million (ppm)	93	float	PR+EV	0	100000	0
CarbonDioxidePeakLevel measured in parts per million (ppm)	94	float	PR+EV	0	100000	0

## CarbonMonoxideSensor (7F)

Defines a Carbon Monoxide Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CarbonMonoxideDetected indicates if abnormal level is detected	69	uint8	PR+EV	0	1	NORMAL (0) ABNORMAL (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
CarbonMonoxideLevel measured in parts per million (ppm)	90	float	PR+EV	0	100	0
CarbonMonoxidePeakLevel measured in parts per million (ppm)	91	float	PR+EV	0	100	0

## ContactSensor (80)

Defines a Contact Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
ContactSensorState indictates if contact is detected (i.e. closed)	6A	uint8	PR+EV	0	1	DETECTED (0) NOT_DETECTED (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## Door (81)

Defines a motorized Door.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentPosition current position (as a percentage) from fully closed (0) to full open (100)	6D	uint8	PR+EV	0	100	0
TargetPosition	7C	uint8	PW+PR+EV	0	100	0
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
ObstructionDetected indicates if obstruction is detected	24	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)

## Doorbell (121)

Defines a Doorbell. Can be used on a standalone basis or in conjunction with a LockMechanism Service.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
ProgrammableSwitchEvent	73	uint8	PR+EV+NV	0	2	SINGLE_PRESS (0) DOUBLE_PRESS (1) LONG_PRESS (2)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## Fan (B7)

Defines a Fan. Can be used in conjunction with a LightBulb Service to create a Lighted Ceiling Fan.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
CurrentFanState indicates current state of a fan	AF	uint8	PR+EV	0	2	INACTIVE (0) IDLE (1) BLOWING (2)
TargetFanState	BF	uint8	PW+PR+EV	0	1	MANUAL (0) AUTO (1)
RotationDirection	28	int	PR+PW+EV	0	1	CLOCKWISE (0) COUNTERCLOCKWISE (1)
RotationSpeed	29	float	PR+PW+EV	0	100	0
SwingMode	B6	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
LockPhysicalControls indicates if local control lock is enabled	A7	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## Faucet (D7)

Defines the master control for a multi-Valve appliance. Linked Services: Valve (at least one required), and HeaterCooler (optional).

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## FilterMaintenance (BA)

Defines a Filter Maintainence check.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
FilterChangeIndication indicates state of filter	AC	uint8	PR+EV	0	1	NO_CHANGE_NEEDED (0) CHANGE_NEEDED (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
FilterLifeLevel measures as a percentage of remaining life	AB	float	PR+EV	0	100	0
ResetFilterIndication	AD	uint8	PW	1	1	0

## GarageDoorOpener (41)

Defines a motorized Garage Door Opener.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentDoorState indicates current state of a door	E	uint8	PR+EV	0	4	OPEN (0) CLOSED (1) OPENING (2) CLOSING (3) STOPPED (4)
TargetDoorState	32	uint8	PW+PR+EV	0	1	OPEN (0) CLOSED (1)
ObstructionDetected indicates if obstruction is detected	24	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
LockCurrentState indictates state of a lock	1D	uint8	PR+EV	0	3	UNLOCKED (0) LOCKED (1) JAMMED (2) UNKNOWN (3)
LockTargetState indicates desired state of lock	1E	uint8	PW+PR+EV	0	1	UNLOCK (0) LOCK (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
Version	37	string	PR	-	-	"1.0.0"

## HeaterCooler (BC)

Defines a standalone Heater, Cooler, or combined Heater/Cooler. Can be used with a separate Fan Service and/or Slat Service to extend functionality.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
CurrentTemperature current temperature measured in Celsius	11	float	PR+EV	0	100	0
CurrentHeaterCoolerState indicates whether appliance is currently heating, cooling, idle, or off	B1	uint8	PR+EV	0	3	INACTIVE (0) IDLE (1) HEATING (2) COOLING (3)
TargetHeaterCoolerState	B2	uint8	PW+PR+EV	0	2	AUTO (0) HEAT (1) COOL (2)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
RotationSpeed	29	float	PR+PW+EV	0	100	0
TemperatureDisplayUnits	36	uint8	PW+PR+EV	0	1	CELSIUS (0) FAHRENHEIT (1)
SwingMode	B6	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
CoolingThresholdTemperature cooling turns on when temperature (in Celsius) rises above this threshold	D	float	PR+PW+EV	10	35	10
HeatingThresholdTemperature heating turns on when temperature (in Celsius) falls below this threshold	12	float	PR+PW+EV	0	25	16
LockPhysicalControls indicates if local control lock is enabled	A7	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## HumidifierDehumidifier (BD)

Defines a Humidifer, Dehumidifier, or combined Humidifer/Dehumidifier. Can be used with a separate Fan Service and/or Slat Service to extend functionality.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
CurrentRelativeHumidity current humidity measured as a percentage	10	float	PR+EV	0	100	0
CurrentHumidifierDehumidifierState indicates current state of humidifier/dehumidifer	B3	uint8	PR+EV	0	3	INACTIVE (0) IDLE (1) HUMIDIFYING (2) DEHUMIDIFYING (3)
TargetHumidifierDehumidifierState	B4	uint8	PW+PR+EV	0	2	AUTO (0) HUMIDIFY (1) DEHUMIDIFY (2)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
RelativeHumidityDehumidifierThreshold	C9	float	PR+PW+EV	0	100	50
RelativeHumidityHumidifierThreshold	CA	float	PR+PW+EV	0	100	50
RotationSpeed	29	float	PR+PW+EV	0	100	0
SwingMode	B6	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
WaterLevel	B5	float	PR+EV	0	100	0
LockPhysicalControls indicates if local control lock is enabled	A7	uint8	PW+PR+EV	0	1	CONTROL_LOCK_DISABLED (0) CONTROL_LOCK_ENABLED (1)

## HumiditySensor (82)

Defines a Humidity Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentRelativeHumidity current humidity measured as a percentage	10	float	PR+EV	0	100	0
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## InputSource (D9)

Defines an Input Source for a TV. Use only as a Linked Service for the Television Service.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
ConfiguredName	E3	string	PW+PR+EV	-	-	"unnamed"
IsConfigured indicates if a predefined Service has been configured	D6	uint8	PR+EV	0	1	NOT_CONFIGURED (0) CONFIGURED (1)
Identifier	E6	uint32	PR	0	255	0
CurrentVisibilityState	135	uint8	PR+EV	0	1	0
TargetVisibilityState	134	uint8	PW+PR+EV	0	1	0

## IrrigationSystem (CF)

Defines an Irrigation System. Linked Services: Valve Service (at least one required).

Characteristic	UUID	Format	Perms	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	1	INACTIVE (0) ACTIVE (1)
ProgramMode	D1	uint8	PR+EV	2	NONE (0) SCHEDULED (1) SCHEDULE_OVERRIDEN (2)
InUse if Service is set to active, this indictes whether it is currently in use	D2	uint8	PR+EV	1	NOT_IN_USE (0) IN_USE (1)
RemainingDuration	D4	uint32	PR+EV	3600	60
StatusFault	77	uint8	PR+EV	1	NO_FAULT (0) FAULT (1)

## LeakSensor (83)

Defines a Leak Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
LeakDetected indictates if a leak is detected	70	uint8	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## LightBulb (43)

Defines any type of Light.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
On indicates if the Service is active/on	25	bool	PR+PW+EV	0	1	OFF (0) ON (1)
Brightness measured as a percentage	8	int	PR+PW+EV	0	100	0
Hue color (in degrees) from red (0) to green (120) to blue (240) and back to red (360)	13	float	PR+PW+EV	0	360	0
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
Saturation	2F	float	PR+PW+EV	0	100	0
ColorTemperature measured in inverse megaKelvin (= 1,000,000 / Kelvin)	CE	uint32	PR+PW+EV	140	500	200

## LightSensor (84)

Defines a Light Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentAmbientLightLevel measured in Lux (lumens/m²	6B	float	PR+EV	0.0001	100000	1
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## LockMechanism (45)

Defines an electronic Lock.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
LockCurrentState indictates state of a lock	1D	uint8	PR+EV	0	3	UNLOCKED (0) LOCKED (1) JAMMED (2) UNKNOWN (3)
LockTargetState indicates desired state of lock	1E	uint8	PW+PR+EV	0	1	UNLOCK (0) LOCK (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
Mute not used	11A	bool	PW+PR+EV	0	1	OFF (0) ON (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
Volume	119	uint8	PW+PR+EV	0	100	0

## MotionSensor (85)

Defines a Motion Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
MotionDetected indicates if motion is detected	22	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## OccupancySensor (86)

Defines and Occupancy Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
OccupancyDetected indicates if occupanccy is detected	71	uint8	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## Outlet (47)

Defines an controllable Outlet used to power any light or appliance.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
On indicates if the Service is active/on	25	bool	PR+PW+EV	0	1	OFF (0) ON (1)
OutletInUse indicates if an appliance or light is plugged into the outlet, regardless of whether on or off	26	bool	PR+EV	0	1	NOT_IN_USE (0) IN_USE (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## SecuritySystem (7E)

Defines a Security System.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
SecuritySystemCurrentState	66	uint8	PR+EV	0	4	ARMED_STAY (0) ARMED_AWAY (1) ARMED_NIGHT (2) DISARMED (3) ALARM_TRIGGERED (4)
SecuritySystemTargetState	67	uint8	PW+PR+EV	0	3	ARM_STAY (0) ARM_AWAY (1) ARM_NIGHT (2) DISARM (3)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
SecuritySystemAlarmType	8E	uint8	PR+EV	0	1	KNOWN (0) UNKNOWN (1)
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
ServiceLabelNamespace	CD	uint8	PR	0	1	DOTS (0) NUMERALS (1)

## Slat (B9)

Defines a motorized ventilation Slat(s).

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentSlatState indicates current state of slats	AA	uint8	PR+EV	0	2	FIXED (0) JAMMED (1) SWINGING (2)
SlatType	C0	uint8	PR	0	1	HORIZONTAL (0) VERTICAL (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
SwingMode	B6	uint8	PR+EV+PW	0	1	SWING_DISABLED (0) SWING_ENABLED (1)
CurrentTiltAngle angle (in degrees) of slats from fully up or left (-90) to fully open (0) to fully down or right (90)	C1	int	PR+EV	-90	90	0
TargetTiltAngle	C2	int	PW+PR+EV	-90	90	0

## SmokeSensor (87)

Defines a Smoke Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
SmokeDetected	76	uint8	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)
Mute not used	11A	bool	PW+PR+EV	0	1	OFF (0) ON (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
Volume	119	uint8	PW+PR+EV	0	100	0

## StatelessProgrammableSwitch (89)

Defines a "Stateless" Programmable Switch that can be used to trigger actions in the Home App.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
ProgrammableSwitchEvent	73	uint8	PR+EV+NV	0	2	SINGLE_PRESS (0) DOUBLE_PRESS (1) LONG_PRESS (2)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## Switch (49)

Defines a generic Switch.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
On indicates if the Service is active/on	25	bool	PR+PW+EV	0	1	OFF (0) ON (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## Television (D8)

Defines a TV. Optional Linked Services: InputSource and TelevisionSpeaker.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
ConfiguredName	E3	string	PW+PR+EV	-	-	"unnamed"
ActiveIdentifier the Identifier of the current Input Source	E7	uint32	PW+PR+EV	0	255	0
RemoteKey	E1	uint8	PW	0	16	0
PowerModeSelection	DF	uint8	PW	0	1	0

## TelevisionSpeaker (113)

Defines a Television Speaker that can be controlled via the Remote Control widget on an iPhone. Use only as a Linked Service for the Television Service.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
VolumeControlType	E9	uint8	PR+EV	0	3	0
VolumeSelector	EA	uint8	PW	0	1	0

## TemperatureSensor (8A)

Defines a Temperature Sensor.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentTemperature current temperature measured in Celsius	11	float	PR+EV	0	100	0
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
StatusActive	75	bool	PR+EV	0	1	true
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
StatusTampered	7A	uint8	PR+EV	0	1	NOT_TAMPERED (0) TAMPERED (1)
StatusLowBattery	79	uint8	PR+EV	0	1	NOT_LOW_BATTERY (0) LOW_BATTERY (1)

## Thermostat (4A)

Defines a Thermostat used to control a furnace, air conditioner, or both.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentHeatingCoolingState indicates whether appliance is currently heating, cooling, or just idle	F	uint8	PR+EV	0	2	IDLE (0) HEATING (1) COOLING (2)
TargetHeatingCoolingState	33	uint8	PW+PR+EV	0	3	OFF (0) HEAT (1) COOL (2) AUTO (3)
CurrentTemperature current temperature measured in Celsius	11	float	PR+EV	0	100	0
TargetTemperature	35	float	PW+PR+EV	10	38	16
TemperatureDisplayUnits	36	uint8	PW+PR+EV	0	1	CELSIUS (0) FAHRENHEIT (1)
CoolingThresholdTemperature cooling turns on when temperature (in Celsius) rises above this threshold	D	float	PR+PW+EV	10	35	10
CurrentRelativeHumidity current humidity measured as a percentage	10	float	PR+EV	0	100	0
HeatingThresholdTemperature heating turns on when temperature (in Celsius) falls below this threshold	12	float	PR+PW+EV	0	25	16
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
TargetRelativeHumidity	34	float	PW+PR+EV	0	100	0

## Valve (D0)

Defines an electronic Valve. Can be used standalone or as a Linked Service in conjunction with the Faucet and IrrigationSystem Services.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
Active indicates if the Service is active/on	B0	uint8	PW+PR+EV	0	1	INACTIVE (0) ACTIVE (1)
InUse if Service is set to active, this indictes whether it is currently in use	D2	uint8	PR+EV	0	1	NOT_IN_USE (0) IN_USE (1)
ValveType	D5	uint8	PR+EV	0	3	0
SetDuration	D3	uint32	PW+PR+EV	0	3600	60
RemainingDuration	D4	uint32	PR+EV	0	3600	60
IsConfigured indicates if a predefined Service has been configured	D6	uint8	PR+EV	0	1	NOT_CONFIGURED (0) CONFIGURED (1)
StatusFault	77	uint8	PR+EV	0	1	NO_FAULT (0) FAULT (1)
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"

## Window (8B)

Defines a motorized Window.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
CurrentPosition current position (as a percentage) from fully closed (0) to full open (100)	6D	uint8	PR+EV	0	100	0
TargetPosition	7C	uint8	PW+PR+EV	0	100	0
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
ObstructionDetected indicates if obstruction is detected	24	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)

## WindowCovering (8C)

Defines a motorized Window Shade, Screen, Awning, etc.

Characteristic	UUID	Format	Perms	Min	Max	Defaults
TargetPosition	7C	uint8	PW+PR+EV	0	100	0
CurrentPosition current position (as a percentage) from fully closed (0) to full open (100)	6D	uint8	PR+EV	0	100	0
Name default name of a Service used only during initial pairing	23	string	PR	-	-	"unnamed"
CurrentHorizontalTiltAngle current angle (in degrees) of slats from fully up (-90) to fully open (0) to fully down (90)	6C	int	PR+EV	-90	90	0
TargetHorizontalTiltAngle	7B	int	PW+PR+EV	-90	90	0
CurrentVerticalTiltAngle current angle (in degrees) of slats from fully left (-90) to fully open (0) to fully right (90)	6E	int	PR+EV	-90	90	0
TargetVerticalTiltAngle	7D	int	PW+PR+EV	-90	90	0
ObstructionDetected indicates if obstruction is detected	24	bool	PR+EV	0	1	NOT_DETECTED (0) DETECTED (1)