/* HomeSpan Remote Control Example */

#include "HomeSpan.h"             // include the HomeSpan library
#include "extras/RFControl.h"     // include RF Control Library

void setup() {     
 
  Serial.begin(115200);           // start the Serial interface
  Serial.flush();
  delay(1000);                    // wait for interface to flush

  Serial.print("\n\nHomeSpan RF Transmitter Example\n\n");

  RFControl rf(13);               // create an instance of RFControl with signal output to pin 13 of the ESP32

  rf.clear();                     // clear the pulse train memory buffer

  rf.add(5000,5000);              // create a pulse train with three 5000-tick high/low pulses
  rf.add(5000,5000);
  rf.add(5000,10000);             // double duration of final low period

  Serial.print("Starting 4 cycles of three 500 ms on pulses...");
  
  rf.start(4,100);                // start transmission of 4 cycles of the pulse train with 1 tick=100 microseconds

  Serial.print("Done!\n");

  delay(2000);

  rf.clear();

  for(int i=1000;i<10000;i+=1000)
    rf.add(i,10000-i);
  rf.add(10000,10000);
  
  Serial.print("Starting 3 cycles of 100-1000 ms pulses...");
  
  rf.start(3,100);                // start transmission of 3 cycles of the pulse train with 1 tick=100 microseconds

  Serial.print("Done!\n");
  
  Serial.print("\nEnd Example");
  
} // end of setup()

void loop(){

} // end of loop()