//////////////////////////////////// // DEVICE-SPECIFIC LED SERVICES // //////////////////////////////////// struct DEV_GarageDoor : Service::GarageDoorOpener { // A Garage Door Opener Characteristic::CurrentDoorState *current; // reference to the Current Door State Characteristic (specific to Garage Door Openers) Characteristic::TargetDoorState *target; // reference to the Target Door State Characteristic (specific to Garage Door Openers) SpanCharacteristic *obstruction; // reference to the Obstruction Detected Characteristic (specific to Garage Door Openers) DEV_GarageDoor() : Service::GarageDoorOpener(){ // constructor() method // Below we use enumerated constants rather than integers to set the values of the Characteristics. // Using enumerated constants means not having to remember the integer code for each state. You'll find // a complete list of all available enumerated constants on HomeSpan's Services and Characteristics page. // Note the use of enumerated constants is optional - you can always use the integer code representing // each state instead. current=new Characteristic::CurrentDoorState(Characteristic::CurrentDoorState::CLOSED); // here we use the fully-qualified name of the constant "CLOSED" target=new Characteristic::TargetDoorState(target->CLOSED); // here we use the name of the object instead of the fully-qualified name (much less typing) // Below we must use the fully-qualified name of the enumerated constant and cannot use "obstruction->NOT_DETECTED". // Why? Because above we declared "obstruction" to be a pointer to a generic SpanCharacteristic instead of a pointer to // the more specific Characteristic::ObstructionDetected. Either is fine, and it's just a matter of programming preference // (as you can see we use both conventions in this sketch). But the downside of using SpanCharacteristic to declare a // Characteristic that contains enumerated constants is that the object itself does not know about these constants. This is // because all enumerated constants are uniquely defined within their respective specific Characteristic classes, and not in the // generic SpanCharacteristic class from which all specific Characterstics are derived. obstruction=new Characteristic::ObstructionDetected(Characteristic::ObstructionDetected::NOT_DETECTED); // this works // obstruction=new Characteristic::ObstructionDetected(obstruction->NOT_DETECTED); // this would produce a compiler error (try it and see) Serial.print("Configuring Garage Door Opener"); // initialization message Serial.print("\n"); } // end constructor boolean update(){ // update() method // see HAP Documentation for details on what each value represents if(target->getNewVal()==target->OPEN){ // HomeKit is requesting the door to be in OPEN position LOG1("Opening Garage Door\n"); current->setVal(current->OPENING); // set the current-state value to OPENING obstruction->setVal(false); // clear any prior obstruction detection - note we do not bother using an enumerated constant here } else { LOG1("Closing Garage Door\n"); // else HomeKit must be requesting the door to be in the CLOSED position current->setVal(current->CLOSING); // set the current-state value to CLOSING obstruction->setVal(false); // clear any prior obstruction detection } return(true); // return true } // update void loop(){ // loop() method if(current->getVal()==target->getVal()) // if current-state matches target-state there is nothing do -- exit loop() return; if(current->getVal()==current->CLOSING && random(100000)==0){ // here we simulate a random obstruction, but only if the door is closing (not opening) current->setVal(current->STOPPED); // if our simulated obstruction is triggered, set the curent-state to STOPPED obstruction->setVal(true); // and set obstruction-detected to true LOG1("Garage Door Obstruction Detected!\n"); } if(current->getVal()==current->STOPPED) // if the current-state is stopped, there is nothing more to do - exit loop() return; // This last bit of code only gets called if the door is in a state that represents actively opening or actively closing. // If there is an obstruction, the door is "stopped" and won't start again until the HomeKit Controller requests a new open or close action if(target->timeVal()>5000) // simulate a garage door that takes 5 seconds to operate by monitoring time since target-state was last modified current->setVal(target->getVal()); // set the current-state to the target-state } // loop }; //////////////////////////////////// struct DEV_WindowShade : Service::WindowCovering { // A motorized Window Shade with Hold Feature SpanCharacteristic *current; // reference to a "generic" Current Position Characteristic (used by a variety of different Service) SpanCharacteristic *target; // reference to a "generic" Target Position Characteristic (used by a variety of different Service) DEV_WindowShade() : Service::WindowCovering(){ // constructor() method current=new Characteristic::CurrentPosition(0); // Window Shades have positions that range from 0 (fully lowered) to 100 (fully raised) target=new Characteristic::TargetPosition(0); // Window Shades have positions that range from 0 (fully lowered) to 100 (fully raised) target->setRange(0,100,10); // set the allowable target-position range to 0-100 IN STEPS of 10 Serial.print("Configuring Motorized Window Shade"); // initialization message Serial.print("\n"); } // end constructor boolean update(){ // update() method if(target->getNewVal()>current->getVal()){ // if the target-position requested is greater than the current-position, simply log a "raise" message LOG1("Raising Shade\n"); // ** there is nothing more to do - HomeKit keeps track of the current-position so knows raising is required } else if(target->getNewVal()getVal()){ // if the target-position requested is less than the current-position, simply log a "raise" message LOG1("Lowering Shade\n"); // ** there is nothing more to do - HomeKit keeps track of the current-position so knows lowering is required } return(true); // return true } // update void loop(){ // loop() method // Here we simulate a window shade that takes 5 seconds to move to its new target posiiton if(current->getVal()!=target->getVal() && target->timeVal()>5000){ // if 5 seconds have elapsed since the target-position was last modified... current->setVal(target->getVal()); // ...set the current position to equal the target position } // Note there is no reason to send continuous updates of the current position to the HomeKit. HomeKit does NOT display the // current position. Rather, it simply compares the value of the current position to the value of target positon as set by the // the user in the Home App. If it finds current and target positions are the same, it knows the shade is stopped. Otherwise // it will report the shade is raising or lowering depending on whether the specified target state is greater or less than // the current state. } // loop };