To enable save/restore for a Characteristic, set second parameter to TRUE when instantiating. Since first parameter was optional as well, this requires setting it as well.
Next up: Must add logic to setVal() to store new value as well.
Allows the user to add a command function to the Command Line Interface. All User Commands are defined with a '@' prefix.
To Do: Document this new feature.
New SpanService method addLink(SpanService *svc), where svc is a pointer to the SpanService that is being specified as a Linked Service for the current Service.
addLink() returns a pointer to "this" so may be chained
homeSpan.enableOTA() is now homeSpan.enableOTA(boolean auth=true). Set auth=false to disable password authentication. Set to true, or leave blank, to enable password authentication.
homeSpan.begin() automatically resizes maxConnections to ensure it is at or below maxLimit, where maxLimit=CONFIG_LWIP_MAX_SOCKETS-2-otaEnabled.
maxConnections still defaults to 8 if unspecified, which means it is reduced to 7 if OTA is enabled. Users should set maxConnections to a lower number is they have implemented other socket-based services in their sketch
HomeSpan will call a user-defined function upon establishing WiFi connectivity.
Set function with homeSpan.setWifiCallback(f), where f must be of form void f().
Specify with homeSpan.setSketchVersion(char *).
Read back with homeSpan.getSketchVersion().
Also, MDNS now broadcasts three new fields:
hspn = HomeSpan Version
sketch = Sketch Version
ota = "yes" if OTA enabled, else "no"
These are all optional to HAP but useful if trying to keep track of version updates when using OTA and Serial Monitor is not available.
A 16-byte SALT with a leading zero would be sent as only a 15-byte number. The chance of this occuring is 1 in 256, which is small but still significant. Solution is to specify required size of MPI output in loadTLV. This forces mbedtls_mpi_write_binary() to pad with leading zeros.
Also eliminated unused code (TLV pack_old).
Setup ID can now be stored in NVS and set dynamically with the 'Q' command. However, homeSpan.setQRID(char *id) will override if present, but will not change the default stored in the NVS. This default wil be used once again if homeSpan.setQRID() is removed from the sektch.
If the NVS is empty, the default is set to "HSPN" as in version 1.1.4.
HomeSpan now broadcasts a Hashed Setup ID as MDNS "sh", which is used when pairing with a QR Code instead of a Setup Code. A text version of the resulting QR code is output to the Serial Monitor whenever the 9-digit Setup Code is generated or changed. The text version of the QR code can then be input into any QR Code Generator to create a pairable QR Code.
The default Setup ID used to create the Hashed Setup ID is "HSPN". This can be changed with homeSpan.setQRCode(const char *id), where id is exactly 4 alphanumeric characters. If not, the request to change the Setup ID is silently ignored and remains "HSPN."
HomeSpan defaults to running the HAP Server on port 80 (the standard HTTP port). This method allows the user to over-ride the default and have HomeSpan run the HAP Server on any other port.
ALSO: In updating this portion of the code, identified an additional parameter to the ESP32 version of WiFiServer that allows one to specify the number of simultaneous Server connections. The ESP32 default is 4, which suggests that the ESP32 was internally juggling connections that HomeSpan was keeping open (since the HomeSpan default is 8 connections).
This WiFiServer call has been updated to now specify both the port number AND the number of maximum simultaneous connections (to match whatever has been set by HomeSpan). This may or may not result in improving performance when more than 4 clients are connected.
WiFi connection now occurs asynchronously so that if WiFi is lost, or cannot be connected at start-up, the device still operates intead of blocking while it tries to connect. The new logic should allow for a wider range of chips to connect.
This change allows the user to set the log-level with homeSpan.setLogLevel() instead of needing to change in Settings.h. Next up: Update Example that introduces VERBOSE to instead use setLogLevel(). Consider adding an interactive 'L' command to change this during run-time.
Also, added "#pragma once" to every *.h file to prevent duplication of definitions. TO DO: Review all #include to ensure sanity across all files.
Created separate init() methods for PushButton and Blinker. Created HomeSpan:setControlPin and HomeSpan:setStatusPin that can be called from main setup() to modify the defaults. All default settings being migrated to Settings.h
Allows for reset of HAP (press for 5 seconds, but less than 10) or Factory reset (press for 10 second). Use setResetPin to change from default of pint 21.
HomeSpan