Seich
/
HomeSpan
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update Extras.md

This commit is contained in:
HomeSpan 2020-11-27 11:54:09 -06:00 committed by GitHub
parent 0f8dba2d87
commit f21645e941
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Extras.md
View File

@ -62,7 +62,7 @@ Since most RF/IR signals repeat the same train of pulses more than once, the dur
* *offTime* - the duration, in *ticks* of the low portion of the pulse. Allowable range is 0-32767 ticks. Requests to add a pulse with an *offTime* of greater than 32767 ticks are ignored but raise non-fatal warning message
* Note that a pulse with either *onTime=0* or *offTime=0* is permitted, but both **cannot** be zero as this is used by the ESP32 to indicate the end of the pulse train.
* note that a pulse with either *onTime=0* or *offTime=0* is permitted, but both **cannot** be zero as this is used by the ESP32 to indicate the end of the pulse train
* `static void clear()`
@ -70,7 +70,7 @@ Since most RF/IR signals repeat the same train of pulses more than once, the dur
* `void start(uint8_t _numCycles, uint8_t tickTime)`
* starts the transmission of the pulse train stored in the pulse train memory buffer. The signal will be output on the *pin* specified when RFControl was instantiated. Note this is a blocking call– the method waits until transmission is completed before returning. This should not provide a noticeable delay in program operations since most RF/IR pulse trains are only a few tens-of-milliseconds long
* starts the transmission of the pulse train stored in the pulse train memory buffer. The signal will be output on the *pin* specified when RFControl was instantiated. Note this is a blocking call—the method waits until transmission is completed before returning. This should not provide a noticeable delay in program operations since most RF/IR pulse trains are only a few tens-of-milliseconds long
* *numCycles* - the total number of times to transmit the pulse train (i.e. a value of 3 means the pulse train will be transmitted once, followed by 2 additional re-transmissions)