From 91b7565c2731045ed61ebd8d1f7b626f77aad7a8 Mon Sep 17 00:00:00 2001 From: HomeSpan Date: Thu, 7 Jan 2021 07:15:59 -0600 Subject: [PATCH] Update UserGuide.md --- docs/UserGuide.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/UserGuide.md b/docs/UserGuide.md index 4f45982..cb26cde 100644 --- a/docs/UserGuide.md +++ b/docs/UserGuide.md @@ -51,11 +51,11 @@ If the Status LED is steady ON, the device is connected to a local WiFi network #### CONNECTING -If the Status LED is repeatedly flashing ON for 1 second and then OFF for 1 second, the device is actively seeking to connect to a WiFi network using the WiFi Credentials stored on the device. The device will remain in this state until HomeSpan either +If the Status LED is repeatedly flashing ON for 1 second and then OFF for 1 second, the device is actively seeking to connect to a WiFi network using the WiFi Credentials stored on the device. The device will remain in this state until: -* successfully connects to a WiFi network +* HomeSpan successfully connects to a WiFi network * you modify or erase the device's WiFi Credentials and restart HomeSpan via the Device Configuration Mode below -* you perform a [Factory Reset](#factory-reset) +* you perform a [Factory Reset](#factory-reset) and restart HomeSpan via the Device Configuration Mode below Note that the Status LED is always active, so if the LED is completely off (not even blinking), the device is not powered!