Added PushButton::primed()

Allows you to determine if short-press has occured but button not yet released.

src/HomeSpan.cpp

@@ -155,15 +155,21 @@ void Span::poll() {
   HAPClient::checkNotifications();  
   HAPClient::checkTimedWrites();
 
-  if(controlButton.triggered(2000,10000)){
+  if(controlButton.primed()){
+    statusLED.start(500);
+  }
+  
+  if(controlButton.triggered(3000,10000)){
     if(controlButton.longPress()){
       statusLED.start(200);
       delay(2000);
-      processSerialCommand("W");        // Delete WiFi Data and Restart      
+      statusLED.off();
+      ESP.restart();
+      processSerialCommand("W");        // DELETE WiFi Data and Restart      
     } else {
       statusLED.off();
       controlButton.reset();
-      processSerialCommand("U");        // UPAIR Device
+      processSerialCommand("U");        // UNPAIR Device
     }
   }
     
@@ -470,7 +476,7 @@ void Span::processSerialCommand(char *c){
     break;
 
     case 'W': {
-      
+
       nvs_erase_all(HAPClient::wifiNVS);
       nvs_commit(HAPClient::wifiNVS);      
       Serial.print("\n** WIFI Network Data DELETED **\n** Restarting...\n\n");

src/Settings.h

@@ -12,8 +12,8 @@
 //                DEFAULT SETTINGS                    
 
 #define     DEFAULT_SETUP_CODE    "46637726"        // changed during network setup or with 'S' command
-#define     DEFAULT_CONTROL_PIN   21                // changed with homeSpan.setControlPin(pin)
+#define     DEFAULT_CONTROL_PIN   21                // change with homeSpan.setControlPin(pin)
-#define     DEFAULT_STATUS_PIN    LED_BUILTIN       // changed with homeSpan.setStatusPin(pin)
+#define     DEFAULT_STATUS_PIN    LED_BUILTIN       // change with homeSpan.setStatusPin(pin)
 
 //////////////////////////////////////////////////////
 //   Maximum number of simultaenous IP connections  //

src/Utils.cpp

@@ -89,6 +89,7 @@ boolean PushButton::triggered(uint16_t shortTime, uint16_t longTime){
     break;
 
     case 1:
+    case 2:
       if(digitalRead(pin)){         // button is released          
         status=0;
         if(millis()>shortAlarm){
@@ -98,13 +99,13 @@ boolean PushButton::triggered(uint16_t shortTime, uint16_t longTime){
       } else
       
       if(millis()>longAlarm){       // button is long-pressed
-        status=2;
+        status=3;
         isLongPress=true;
         return(true);
       }
     break;
 
-    case 2:
+    case 3:
       if(digitalRead(pin))          // button has been released after a long press
         status=0;
     break;
@@ -116,6 +117,18 @@ boolean PushButton::triggered(uint16_t shortTime, uint16_t longTime){
 
 //////////////////////////////////////
 
+boolean PushButton::primed(){
+  
+  if(millis()>shortAlarm && status==1){
+    status=2;
+    return(true);
+  }
+  
+  return(false);
+}
+
+//////////////////////////////////////
+
 boolean PushButton::longPress(){
   return(isLongPress);
 }

src/Utils.h

@@ -86,6 +86,11 @@ class PushButton{
 //  return false until there is a new trigger.  After a Long Press, the button must be released to permit a subsequent
 //  trigger.
 
+  boolean primed();
+
+//  Returns true if button has been pressed and held for greater than shortTime, but has not yet been released.
+//  After returning true, subsequent calls will always return false until the button has been released and reset.
+
   boolean longPress();
 
 //  Returns true if last trigger event was a Long Press, or false if last trigger was a Short Press  

src/src.ino

@@ -7,8 +7,6 @@
 void setup() {
  
   Serial.begin(115200);
-
-  homeSpan.setStatusPin(22);
   
   homeSpan.begin(Category::Lighting,"HomeSpan Benchmark");