Create SRP6A:loadVerifyCode()

And updated other SRP routines to complete implementation of use of stored verification code instead of live setup code.

Next up: Add method to change setup code in serial interface and implement similar code after network configuration routines.

src/HAP.cpp

@@ -24,6 +24,7 @@ void HAPClient::init(){
   
   if(!nvs_get_blob(srpHandle,"VERIFYDATA",NULL,&len)){                   // if found verification code data in NVS
     nvs_get_blob(srpHandle,"VERIFYDATA",&verifyData,&len);               // retrieve data
+    srp.loadVerifyCode(verifyData.verifyCode,verifyData.salt);           // load verification code and salt into SRP structure
 //    Serial.print("Found SRP Verification Data\n\n");
 //    hexPrintRow(verifyData.salt,16); Serial.print("\n");
 //    hexPrintRow(verifyData.verifyCode,384); Serial.print("\n");   

src/HomeSpan.h

@@ -48,7 +48,8 @@ struct Span{
   char *modelName;                              // model name of this device - broadcast as Bonjour field "md" 
   char category[3]="";                          // category ID of primary accessory - broadcast as Bonjour field "ci" (HAP Section 13)
   unsigned long snapTime;                       // current time (in millis) snapped before entering Service loops() or updates()
-  char *defaultSetupCode="46637726";            // default Setup Code upon factory reset; user will change to desired code when configuring network
+  
+  char *defaultSetupCode=(char *)DEFAULT_SETUP_CODE;    // default Setup Code upon factory reset; user will change to desired code when configuring network
 
   int resetPin=21;                              // drive this pin low to "factory" reset NVS data on start-up
   int resetPressed=0;                           // tracks pressing of reset button

src/SRP.cpp

@@ -89,26 +89,18 @@ void SRP6A::createVerifyCode(const char *setupCode, uint8_t *verifyCode, uint8_t
 
 //////////////////////////////////////
 
+void SRP6A::loadVerifyCode(uint8_t *verifyCode, uint8_t *salt){
+  
+  mbedtls_mpi_read_binary(&s,salt,16);
+  mbedtls_mpi_read_binary(&v,verifyCode,384);
+
+}
+
+//////////////////////////////////////
+
 void SRP6A::createPublicKey(){
     
-  uint8_t tBuf[80];     // temporary buffer for staging 
-  uint8_t tHash[64];    // temporary buffer for storing SHA-512 results 
-  char icp[22];         // storage for I:P
-    
-  getSalt();                 // create and load s (random 16 bytes)
   getPrivateKey();           // create and load b (random 32 bytes)
-  getSetupCode(icp);         // I="Pair-Setup" and P=Pair-Setup Code (in form XXX-XX-XXX)
-    
-  // compute x = SHA512( s | SHA512( I | ":" | P ) )
-
-  mbedtls_mpi_write_binary(&s,tBuf,16);                          // write s into first 16 bytes of staging buffer            
-  mbedtls_sha512_ret((uint8_t *)icp,strlen(icp),tBuf+16,0);      // create hash of username:password and write into last 64 bytes of staging buffer
-  mbedtls_sha512_ret(tBuf,80,tHash,0);                           // create second hash of salted, hashed username:password 
-  mbedtls_mpi_read_binary(&x,tHash,64);                          // load hash result into mpi structure x
-
-  // compute v = g^x % N
-  
-  mbedtls_mpi_exp_mod(&v,&g,&x,&N,&_rr);              // create verifier, v (_rr is an internal "helper" structure that mbedtls uses to speed up subsequent exponential calculations)
     
   // compute B = kv + g^b %N
   
@@ -121,45 +113,14 @@ void SRP6A::createPublicKey(){
 
 //////////////////////////////////////
 
-void SRP6A::getSalt(){
-
-  uint8_t salt[16];
-  randombytes_buf(salt,16);            // generate 16 random bytes using libsodium (which uses the ESP32 hardware-based random number generator)
-    
-  mbedtls_mpi_read_binary(&s,salt,16);
-}
-
-//////////////////////////////////////
-
 void SRP6A::getPrivateKey(){
 
   uint8_t privateKey[32];
-  randombytes_buf(privateKey,16);            // generate 32 random bytes using libsodium (which uses the ESP32 hardware-based random number generator)
+  randombytes_buf(privateKey,16);                     // generate 32 random bytes using libsodium (which uses the ESP32 hardware-based random number generator)
 
   mbedtls_mpi_read_binary(&b,privateKey,32);
 }
   
-//////////////////////////////////////
-
- void SRP6A::getSetupCode(char *c){
-
-  sprintf(c,"Pair-Setup:%d%d%d-%d%d-%d%d%d",
-    randombytes_uniform(10),
-    randombytes_uniform(10),
-    randombytes_uniform(10),
-    randombytes_uniform(10),
-    randombytes_uniform(10),
-    randombytes_uniform(10),
-    randombytes_uniform(10),
-    randombytes_uniform(10)
-    );
-
-  Serial.print("\n\n");
-  Serial.print("SET-UP CODE:  ");
-  Serial.print(c+11);  
-  Serial.print("\n\n");
-}
-
 //////////////////////////////////////
 
 void SRP6A::createSessionKey(){

src/SRP.h

@@ -42,6 +42,7 @@ struct SRP6A {
   SRP6A();                                         // initializes N, G, and computes k
   
   void createVerifyCode(const char *setupCode, uint8_t *verifyCode, uint8_t *salt);
+  void loadVerifyCode(uint8_t *verifyCode, uint8_t *salt);
   
   void getSalt();                                  // generates and stores random 16-byte salt, s
   void getPrivateKey();                            // generates and stores random 32-byte private key, b

src/Settings.h

@@ -8,6 +8,11 @@
 
 const char HOMESPAN_VERSION[]="1.0.0";  
 
+//////////////////////////////////////////////////////
+//              DEFAULT SETUP CODE                  //
+
+const char DEFAULT_SETUP_CODE[]="46637726";  
+
 //////////////////////////////////////////////////////
 //   Maximum number of simultaenous IP connections  //
 //   HAP requires at least 8                        //