Created HomePeer

This is a self-contained library that is used for remote devices set up as HomeSpan Peers via ESP-NOW.

src/HomePeer.cpp

@@ -1,12 +1,14 @@
 
-#include "Now.h"
+#include "HomePeer.h"
+
 #include <WiFi.h>
 #include <esp_wifi.h>
 #include <mbedtls/sha256.h>
+#include <esp_now.h>
     
-void SpanNow::start(const char *macAddress, const char *password){
+void SpanPeer::start(const char *macAddress, const char *password){
 
-  if(sscanf(macAddress,"%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",mac,mac+1,mac+2,mac+3,mac+4,mac+5)!=6){
+  if(sscanf(macAddress,"%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",peerInfo.peer_addr,peerInfo.peer_addr+1,peerInfo.peer_addr+2,peerInfo.peer_addr+3,peerInfo.peer_addr+4,peerInfo.peer_addr+5)!=6){
     Serial.printf("*** ERROR:  Can't start HomeSpan NOW!  Bad MAC Address '%s'\n\n",macAddress);
     return;
   }
@@ -19,24 +21,25 @@ void SpanNow::start(const char *macAddress, const char *password){
   esp_now_register_send_cb(onDataSent);
 
   uint8_t lmk[32];
+  uint8_t mac[6];
   
   mbedtls_sha256_ret((const unsigned char *)password,strlen(password),lmk,0);
   esp_now_set_pmk(lmk+16);
 
-  memcpy(peerInfo.peer_addr, mac, 6);
   peerInfo.encrypt = true;
   memcpy(peerInfo.lmk, lmk, 16);
   esp_now_add_peer(&peerInfo);
   esp_wifi_set_channel(channel, WIFI_SECOND_CHAN_NONE);
 
-  Serial.printf("Started HomeSpan NOW on Channel=%d.  Hub MAC Address: %X:%X:%X:%X:%X:%X\n",channel,mac[0],mac[1],mac[2],mac[3],mac[4],mac[5]);
+  Serial.printf("Started HomePeer: MAC Address = %s  HomeSpan Address = %X:%X:%X:%X:%X:%X\n",WiFi.macAddress().c_str(),
+    peerInfo.peer_addr[0],peerInfo.peer_addr[1],peerInfo.peer_addr[2],peerInfo.peer_addr[3],peerInfo.peer_addr[4],peerInfo.peer_addr[5]);
   started=true;
 }
 
-boolean SpanNow::send(uint8_t *data, size_t len){
+boolean SpanPeer::send(uint8_t *data, size_t len){
   
   if(!started){
-    Serial.printf("*** ERROR:  Can't send data until HomeSpanNOW has been started.\n\n");
+    Serial.printf("*** ERROR:  Can't send data until HomePeer has been started.\n\n");
     return(false);
     }
 
@@ -46,7 +49,7 @@ boolean SpanNow::send(uint8_t *data, size_t len){
     if((1<<channel) & channelMask){
       for(int i=1;i<=3;i++){
         Serial.printf("Sending on channel %d, attempt #%d\n",channel,i);
-        esp_now_send(mac, data, len);
+        esp_now_send(peerInfo.peer_addr, data, len);
         xQueueReceive(statusQueue, &status, pdMS_TO_TICKS(2000));
         if(status==ESP_NOW_SEND_SUCCESS)
           return(true);
@@ -61,6 +64,6 @@ boolean SpanNow::send(uint8_t *data, size_t len){
   return(false);
 }    
 
-QueueHandle_t SpanNow::statusQueue;
+QueueHandle_t SpanPeer::statusQueue;
 
-SpanNow homeSpanNow;
+SpanPeer homePeer;

src/HomePeer.h

@@ -2,11 +2,9 @@
 #include <Arduino.h>
 #include <esp_now.h>
 
-
-class SpanNow {
+class SpanPeer {
 
   esp_now_peer_info_t peerInfo;
-  uint8_t mac[6];
   boolean started=false;
   static QueueHandle_t statusQueue;  
   int channel=1;
@@ -23,3 +21,5 @@ class SpanNow {
   boolean send(uint8_t *data, size_t len);  
   
 };
+
+extern SpanPeer homePeer;

src/HomeSpan.cpp

@@ -58,6 +58,8 @@ void Span::begin(Category catID, const char *displayName, const char *hostNameBa
   this->modelName=modelName;
   sprintf(this->category,"%d",(int)catID);
 
+  WiFi.mode(WIFI_AP_STA);                                     // set mode to mixed AP/STA.  This does not start any servers, just configures the WiFi radio to ensure it does not sleep (required for ESP-NOW)
+
   statusLED=new Blinker(statusDevice,autoOffLED);             // create Status LED, even is statusDevice is NULL
 
   esp_task_wdt_delete(xTaskGetIdleTaskHandleForCPU(0));       // required to avoid watchdog timeout messages from ESP32-C3
@@ -140,7 +142,6 @@ void Span::begin(Category catID, const char *displayName, const char *hostNameBa
   Serial.printf("\nPartition:        %s",esp_ota_get_running_partition()->label);
 
   if(espNowEnabled){                
-    WiFi.mode(WIFI_AP_STA);                             // set mode to mixed AP/STA.  AP mode will not be started, but WiFi will be properly configured for use with ESP-NOW
     esp_now_init();                                     // initialize ESP NOW
     Serial.print("\nESP-NOW:          ENABLED");
   }

src/HomeSpan.h

@@ -48,7 +48,6 @@
 #include "HAPConstants.h"
 #include "HapQR.h"
 #include "Characteristics.h"
-#include "Now.h"
 
 using std::vector;
 using std::unordered_map;