Transmition speed Improved WriteNoResponse

Now it sends data to server in Write Without Response mode. This increase the transmission speed and it get adapted to MIDI over BLE protocol.
Some devices needs a first message with confirmation for clean security flags. After a connection or after an error, the first message is sended like Write (with response).

src/hardware/BLEMIDI_Client_ESP32.h

@@ -58,7 +58,7 @@
      *  Uncomment what you need
      *  These are the default values.
      */
-//#define BLEMIDI_CLIENT_BOND
+#define BLEMIDI_CLIENT_BOND
 //#define BLEMIDI_CLIENT_MITM
 #define BLEMIDI_CLIENT_PAIR
 
@@ -78,7 +78,7 @@ static uint32_t userOnPassKeyRequest()
     return passkey;
 };
 
-/*
+    /*
 ###### BLE COMMUNICATION PARAMS ######
 */
     /** Set connection parameters: 
@@ -94,10 +94,10 @@ static uint32_t userOnPassKeyRequest()
          *  0 latency (Number of intervals allowed to skip),
          *  TimeOut (unit: 10ms) 51 * 10ms = 510ms. Timeout should be minimum 100ms.
          */
-#define BLEMIDI_CLIENT_COMM_MIN_INTERVAL 6      // 7.5ms
-#define BLEMIDI_CLIENT_COMM_MAX_INTERVAL 35     // 40ms
-#define BLEMIDI_CLIENT_COMM_LATENCY 0
-#define BLEMIDI_CLIENT_COMM_TIMEOUT 200         //2000ms
+#define BLEMIDI_CLIENT_COMM_MIN_INTERVAL    6   // 7.5ms
+#define BLEMIDI_CLIENT_COMM_MAX_INTERVAL    35  // 40ms
+#define BLEMIDI_CLIENT_COMM_LATENCY         0   //
+#define BLEMIDI_CLIENT_COMM_TIMEOUT         200 //2000ms
 
 /*
 #############################################
@@ -191,6 +191,7 @@ private:
     BLEAdvertising *_advertising = nullptr;
     BLERemoteCharacteristic *_characteristic = nullptr;
     BLERemoteService *pSvc = nullptr;
+    bool firstTimeSend = true; //First writeValue get sends like Write with reponse for clean security flags. After first time, all messages are send like WriteNoResponse for increase transmision speed.
 
     BLEMIDI_Transport<class BLEMIDI_Client_ESP32> *_bleMidiTransport = nullptr;
 
@@ -228,7 +229,18 @@ public:
             return;
         if (_characteristic == NULL)
             return;
-        _characteristic->writeValue(data, length, true);
+
+        if (firstTimeSend)
+        {
+            _characteristic->writeValue(data, length, true);
+            firstTimeSend = false;
+            return;
+        }
+
+        if (!_characteristic->writeValue(data, length, !_characteristic->canWriteNoResponse()))
+            firstTimeSend = true;
+
+        return;
     }
 
     bool available(byte *pvBuffer);
@@ -236,7 +248,7 @@ public:
     void add(byte value)
     {
         // called from BLE-MIDI, to add it to a buffer here
-        xQueueSend(mRxQueue, &value, portMAX_DELAY/2);
+        xQueueSend(mRxQueue, &value, portMAX_DELAY / 2);
     }
 
 protected:
@@ -254,6 +266,7 @@ protected:
         {
             _bleMidiTransport->_connectedCallback();
         }
+        firstTimeSend = true;
     }
 
     void disconnected()
@@ -262,6 +275,7 @@ protected:
         {
             _bleMidiTransport->_disconnectedCallback();
         }
+        firstTimeSend = true;
     }
 
     void notifyCB(NimBLERemoteCharacteristic *pRemoteCharacteristic, uint8_t *pData, size_t length, bool isNotify);
@@ -421,7 +435,7 @@ void BLEMIDI_Client_ESP32::notifyCB(NimBLERemoteCharacteristic *pRemoteCharacter
 {
     if (this->_characteristic == pRemoteCharacteristic) //Redundant protection
     {
-            receive(pData, length);
+        receive(pData, length);
     }
 }
 
@@ -466,14 +480,14 @@ bool BLEMIDI_Client_ESP32::connect()
                         //Re-connection SUCCESS
                         return true;
                     }
-                }   
+                }
                 /** Disconnect if subscribe failed */
                 _client->disconnect();
             }
             /* If any connection problem exits, delete previous client and try again in the next attemp as new client*/
             NimBLEDevice::deleteClient(_client);
             _client = nullptr;
-            return false; 
+            return false;
         }
         /*If client does not match, delete previous client and create a new one*/
         NimBLEDevice::deleteClient(_client);
@@ -485,14 +499,14 @@ bool BLEMIDI_Client_ESP32::connect()
         Serial.println("Max clients reached - no more connections available");
         return false;
     }
-    
+
     // Create and setup a new client
     _client = BLEDevice::createClient();
 
     _client->setClientCallbacks(new MyClientCallbacks(this), false);
 
     _client->setConnectionParams(BLEMIDI_CLIENT_COMM_MIN_INTERVAL, BLEMIDI_CLIENT_COMM_MAX_INTERVAL, BLEMIDI_CLIENT_COMM_LATENCY, BLEMIDI_CLIENT_COMM_TIMEOUT);
-    
+
     /** Set how long we are willing to wait for the connection to complete (seconds), default is 30. */
     _client->setConnectTimeout(15);
 
@@ -523,15 +537,15 @@ bool BLEMIDI_Client_ESP32::connect()
     Serial.print("RSSI: ");
     Serial.println(_client->getRssi());
     */
-    
+
     /** Now we can read/write/subscribe the charateristics of the services we are interested in */
     pSvc = _client->getService(SERVICE_UUID);
     if (pSvc) /** make sure it's not null */
-    { 
+    {
         _characteristic = pSvc->getCharacteristic(CHARACTERISTIC_UUID);
-        
+
         if (_characteristic) /** make sure it's not null */
-        { 
+        {
             if (_characteristic->canNotify())
             {
                 if (_characteristic->subscribe(true, std::bind(&BLEMIDI_Client_ESP32::notifyCB, this, _1, _2, _3, _4)))
@@ -542,7 +556,7 @@ bool BLEMIDI_Client_ESP32::connect()
             }
         }
     }
-    
+
     //If anything fails, disconnect and delete client
     _client->disconnect();
     NimBLEDevice::deleteClient(_client);